Getting G13 with a Skystar II 2.6, channels strong in Kaffeine kernel 2.6.24, SuSe 10.1, Kaffeine 0.8.6, dvbtools 1.1.1 scan -c (while tuned to a channel) works fine. But : ------------------------------------- /scan # ./scan -vvvv -a 0 -s 3 ./dvb-s/g13--cb scanning ./dvb-s/g13--cb using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 3800000 H 27690000 3 >>> tune to: 3800:h:3:27690 DiSEqC: switch pos 3, 18V, loband (index 13) diseqc_send_msg:59: DiSEqC: e0 10 38 fe 00 00 Frontend fd is '3', FE_SET_FRONTEND is '1076129612' __tune_to_transponder:1483: ERROR: Setting frontend parameters failed: 22 Invalid argument >>> tune to: 3800:h:3:27690 DiSEqC: switch pos 3, 18V, loband (index 13) diseqc_send_msg:59: DiSEqC: e0 10 38 fe 00 00 Frontend fd is '3', FE_SET_FRONTEND is '1076129612' __tune_to_transponder:1483: ERROR: Setting frontend parameters failed: 22 Invalid argument ERROR: initial tuning failed dumping lists (0 services) Done. ---------------------------------------- Pls note I added an info() statement to get the values being sent to frontend_fd and fe_set_frontend. Do these values look acceptable, or am I looking in the wrong place? _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
