|
I followed the wiki and install all correctly but the scan (scan
/usr/share/dvb/dvb-t/fr-Lyon-Pilat) output is : scanning /usr/share/dvb/dvb-t/fr-Lyon-Pilat using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 666000000 0 2 9 3 1 0 0 initial transponder 594000000 0 2 9 3 1 0 0 initial transponder 618000000 0 2 9 3 1 0 0 initial transponder 738000000 0 2 9 3 1 0 0 initial transponder 642000000 0 2 9 3 1 0 0 initial transponder 682000000 0 2 9 3 1 0 0 >>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: 594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: 618000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: 738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: 642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: 682000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 dumping lists (0 services) Done. dmesg output : usb 3-1: new high speed USB device using ehci_hcd and address 6 usb 3-1: new device found, idVendor=15a4, idProduct=9016 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: DVB-T 2 usb 3-1: Manufacturer: Geniatech usb 3-1: SerialNumber: 010101010600001 usb 3-1: configuration #1 chosen from 1 choice dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) DVB: registering frontend 0 (AF901X USB DVB-T)... dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. input: Geniatech DVB-T 2 as /class/input/input9 input: USB HID v1.01 Keyboard [Geniatech DVB-T 2] on usb-0000:00:10.3-1 lsmod | grep dvb output : dvb_usb_af9015 56544 4294967292 dvb_usb 24716 1 dvb_usb_af9015 dvb_core 78376 1 dvb_usb firmware_class 13568 1 dvb_usb i2c_core 27520 3 nvidia,dvb_usb,i2c_viapro usbcore 124268 8 snd_usb_audio,dvb_usb_af9015,dvb_usb,snd_usb_lib,usbhid,ehci_hcd,uhci_hcd The installed firmware is : http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/ I am running the opensuse 10.3 with the 2.6.22.17-0.1-default kernel. Any idea ? Guillaume |
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
