On Monday 11 February 2008, Bruce Schultz wrote: > On 21/01/08 08:13, Peter D. wrote: > > On Monday 21 January 2008, Bruce Schultz wrote: > >> On 20/01/08 20:47, Peter D. wrote: > >>> On Sunday 20 January 2008, Jeff Bailes wrote: > >>>> Hi, > >>>> Back in November, channel Seven changed their fec_hi from 2/3 to > >>>> 3/4 causing scans to not pick it up > >>>> ( > >>>> http://www.dba.org.au/index.asp?sectionID=39&newsID=982&display=news > >>>> ). The new entry in the au-Melbourne file for channel seven should > >>>> be: # Seven > >>>> T 177500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE > >>>> > >>>> I attached the complete updated file anyway. > >>>> Jeff > >>> > >>> They are a pain. > >>> > >>> Anyway, according to the web site that you quoted, all tuners that > >>> comply with Australian standards will cope without adjustment. > >>> Unfortunately not all tuners comply with Australian standards. :-( > >>> > >>> Presumably all au-tuning_files should have their channel 7 entry > >>> updated. Can this be done at the data base end, or do all files have > >>> to be re-submitted? Also the GI in Brisbane is noted as changing as > >>> well. > >> > >> I can confirm that the au-Brisbane scan file needs to change. It works > >> now for me with the same channel 7 line that Jeff included above. Scan > >> wasn't finding channel 7 without the change. > > > > Did you just change fec_hi, or did you change the Guard Interval as > > well? The quoted web page states that the GI is now 1/16. (It is > > possible that your card is smart enough to sort out GI by itself, > > but not fec_hi.) > > Sorry about the belated reply.... Yes, I changed the GI to 1/16. Bruce, That's OK. Do you feel competent to submit an updated file for Brisbane? -- sig goes here... Peter D. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
