On 21/01/08 08:13, Peter D. wrote: Sorry about the belated reply.... Yes, I changed the GI to 1/16.On Monday 21 January 2008, Bruce Schultz wrote:On 20/01/08 20:47, Peter D. wrote:On Sunday 20 January 2008, Jeff Bailes wrote:Hi, Back in November, channel Seven changed their fec_hi from 2/3 to 3/4 causing scans to not pick it up ( http://www.dba.org.au/index.asp?sectionID=39&newsID=982&display=news ). The new entry in the au-Melbourne file for channel seven should be: # Seven T 177500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE I attached the complete updated file anyway. JeffThey are a pain. Anyway, according to the web site that you quoted, all tuners that comply with Australian standards will cope without adjustment. Unfortunately not all tuners comply with Australian standards. :-( Presumably all au-tuning_files should have their channel 7 entry updated. Can this be done at the data base end, or do all files have to be re-submitted? Also the GI in Brisbane is noted as changing as well.I can confirm that the au-Brisbane scan file needs to change. It works now for me with the same channel 7 line that Jeff included above. Scan wasn't finding channel 7 without the change.Did you just change fec_hi, or did you change the Guard Interval as well? The quoted web page states that the GI is now 1/16. (It is possible that your card is smart enough to sort out GI by itself, but not fec_hi.) |
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb