For the DiB7000 the code I sent is requiring a 5.2 IF firmware. Although it should be possible to recover an offset of 200kHz I would recommend to use this firmware. Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ On Fri, 15 Feb 2008, Mauro Carvalho Chehab wrote: > Hi Albert, > > On Thu, 14 Feb 2008 21:20:32 +0100 > "Albert Comerma" <albert.comerma@xxxxxxxxx> wrote: > >> [ 2251.856000] xc2028 4-0061: Error on line 1063: -5 > > The above error is really weird. It seems to be related to something that > happened before xc2028, since firmware load didn't start on that point of the > code. > > >> [ 2289.284000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 > This message means that xc3028 firmware were successfully loaded and it is > running ok. > >> [ 2282.504000] xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. >> [ 2289.104000] xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000. >> [ 2289.224000] xc2028 4-0061: Loading SCODE for type=DTV8 SCODE HAS_IF_5400 (60000200), id 0000000000000000. > > The above messages state what firmware you've loaded. > > xc3028 version 2.7 has 80 different firmwares. If you load a wrong one, your > device won't work. > >> From the above, the driver is assuming that you're on an area with 8MHz video > channels. Also, your demod should be using IF = 5.4 MHz: > > Firmware 64, type: DTV8 CHINA SCODE HAS IF (0x64000200), IF = 5.40 MHz id: (0000000000000000), size: 192 > > Does the above firmware correspond to your configuration? > > Cheers, > Mauro > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb