Hi Albert, On Thu, 14 Feb 2008 21:20:32 +0100 "Albert Comerma" <albert.comerma@xxxxxxxxx> wrote: > [ 2251.856000] xc2028 4-0061: Error on line 1063: -5 The above error is really weird. It seems to be related to something that happened before xc2028, since firmware load didn't start on that point of the code. > [ 2289.284000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 This message means that xc3028 firmware were successfully loaded and it is running ok. > [ 2282.504000] xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. > [ 2289.104000] xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000. > [ 2289.224000] xc2028 4-0061: Loading SCODE for type=DTV8 SCODE HAS_IF_5400 (60000200), id 0000000000000000. The above messages state what firmware you've loaded. xc3028 version 2.7 has 80 different firmwares. If you load a wrong one, your device won't work. >From the above, the driver is assuming that you're on an area with 8MHz video channels. Also, your demod should be using IF = 5.4 MHz: Firmware 64, type: DTV8 CHINA SCODE HAS IF (0x64000200), IF = 5.40 MHz id: (0000000000000000), size: 192 Does the above firmware correspond to your configuration? Cheers, Mauro _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb