Re: [PATCH] support Cinergy HT USB XE (0ccd:0058)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Finally I got what you mean... you changed the extract_firmware.pl, but not only the comment I guess... also the values below. I tested both and the result is the same as described before, everything seems correct, but I have some errors on dmesg and nothing is detected on scan (I must try with an amplified antenna but I think it should detect something).

Albert


[ 9318.084000] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 9318.216000] usb 1-1: configuration #1 chosen from 1 choice
[ 9318.216000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in cold state, will try to load a firmware
[ 9318.244000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 9318.444000] dib0700: firmware started successfully.
[ 9318.948000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in warm state.
[ 9318.948000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 9318.948000] DVB: registering new adapter (Pinnacle Expresscard 320cx)
[ 9319.316000] DVB: registering frontend 0 (DiBcom 7000PC)...
[ 9319.316000] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
[ 9319.316000] input: IR-receiver inside an USB DVB receiver as /class/input/input13
[ 9319.316000] dvb-usb: schedule remote query interval to 150 msecs.
[ 9319.316000] dvb-usb: Pinnacle Expresscard 320cx successfully initialized and connected.
[ 9342.272000] xc2028 4-0061: Error on line 1063: -5
[ 9363.912000] xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 9363.912000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0
[ 9363.912000] 
[ 9363.936000] xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 9363.936000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0
[ 9363.936000] 
[ 9370.424000] xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000.
[ 9370.540000] xc2028 4-0061: Loading SCODE for type=DTV8 SCODE HAS_IF_5400 (60000200), id 0000000000000000.
[ 9370.600000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9370.624000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9370.624000] 
[ 9372.296000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9372.316000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9372.316000] 
[ 9373.888000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9373.908000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9373.908000] 
[ 9375.564000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9375.584000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9375.584000] 
[ 9377.140000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9377.160000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9377.160000] 
[ 9378.812000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9378.832000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9378.832000] 
[ 9380.392000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9380.416000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9380.416000] 
[ 9382.068000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9382.088000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9382.088000] 
[ 9383.652000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9383.676000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9383.676000] 
[ 9385.332000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9385.352000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9385.352000] 
[ 9386.920000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9386.940000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9386.940000] 
[ 9388.600000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9388.620000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9388.620000] 
[ 9390.180000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9390.200000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9390.200000] 
[ 9391.856000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9391.876000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9391.876000] 
[ 9393.444000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9393.468000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9393.468000] 
[ 9395.124000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9395.144000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9395.144000] 
[ 9396.716000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9396.740000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9396.740000] 
[ 9398.392000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9398.412000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9398.412000] 
[ 9399.968000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9399.996000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9399.996000] 
[ 9401.644000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9401.664000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9401.664000] 
[ 9403.232000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9403.256000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9403.256000] 
[ 9404.900000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9404.920000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9404.920000] 
[ 9406.480000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9406.500000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9406.500000] 
[ 9408.152000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9408.176000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9408.176000] 
[ 9409.748000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9409.768000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9409.768000] 
[ 9411.420000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9411.440000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9411.440000] 
[ 9413.008000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9413.028000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9413.028000] 
[ 9414.680000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9414.700000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9414.700000] 
[ 9416.268000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9416.292000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9416.292000] 
[ 9417.952000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9417.972000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9417.972000] 
[ 9419.532000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9419.552000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9419.552000] 
[ 9421.204000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9421.224000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9421.224000] 
[ 9422.788000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9422.808000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9422.808000] 
[ 9424.460000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9424.480000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9424.480000] 
[ 9426.048000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9426.068000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9426.068000] 
[ 9427.728000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9427.748000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9427.748000] 
[ 9429.308000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9429.328000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9429.328000] 
[ 9430.988000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9431.008000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9431.008000] 
[ 9432.572000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9432.596000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9432.596000] 
[ 9434.248000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9434.268000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9434.268000] 
[ 9435.840000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9435.860000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9435.860000] 
[ 9437.512000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9437.532000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9437.532000] 
[ 9439.096000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9439.120000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9439.120000] 
[ 9440.780000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9440.800000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9440.800000] 
[ 9442.360000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9442.384000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9442.384000] 
[ 9444.036000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9444.060000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9444.060000] 
[ 9445.620000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9445.640000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9445.640000] 
[ 9447.288000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9447.308000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9447.308000] 
[ 9448.876000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9448.896000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9448.896000] 
[ 9450.556000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9450.576000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9450.576000] 
[ 9452.136000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9452.160000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9452.160000] 
[ 9453.812000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9453.832000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9453.832000] 
[ 9455.396000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9455.416000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9455.416000] 
[ 9457.064000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9457.088000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9457.088000] 
[ 9458.648000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9458.672000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9458.672000] 
[ 9460.328000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9460.348000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9460.348000] 
[ 9461.908000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9461.928000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9461.928000] 
[ 9463.588000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9463.608000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9463.608000] 
[ 9465.176000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9465.200000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9465.200000] 
[ 9466.848000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9466.868000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9466.868000] 
[ 9468.432000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9468.452000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9468.452000] 
[ 9470.112000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9470.132000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9470.132000] 
[ 9471.692000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9471.712000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9471.712000] 
[ 9473.360000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9473.380000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9473.380000] 
[ 9474.936000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9474.960000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9474.960000] 
[ 9476.616000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9476.636000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9476.636000] 
[ 9478.200000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9478.224000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9478.224000] 
[ 9479.868000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9479.892000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9479.892000] 
[ 9481.456000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9481.476000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9481.476000] 
[ 9483.128000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9483.148000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9483.148000] 
[ 9484.720000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9484.740000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9484.740000] 
[ 9486.400000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9486.420000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9486.420000] 
[ 9487.992000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9488.012000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9488.012000] 
[ 9489.672000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9489.692000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9489.692000] 
[ 9491.256000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9491.276000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9491.276000] 
[ 9492.928000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9492.948000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9492.948000] 
[ 9494.508000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9494.532000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9494.532000] 
[ 9496.180000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9496.200000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9496.200000] 
[ 9497.764000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9497.784000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9497.784000] 
[ 9499.444000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9499.464000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9499.464000] 
[ 9501.024000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9501.048000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9501.048000] 
[ 9502.708000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9502.728000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9502.728000] 
[ 9504.288000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9504.316000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9504.316000] 
[ 9505.980000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9506.000000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9506.000000] 
[ 9507.564000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9507.584000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9507.584000] 
[ 9509.240000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9509.260000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9509.260000] 
[ 9510.824000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9510.844000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9510.844000] 
[ 9512.492000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9512.512000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9512.512000] 
[ 9514.076000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9514.100000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9514.104000] 
[ 9515.764000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9515.784000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9515.784000] 
[ 9517.352000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9517.372000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9517.372000] 
[ 9519.032000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9519.052000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9519.052000] 
[ 9520.612000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9520.632000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9520.632000] 
[ 9522.280000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9522.300000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9522.300000] 
[ 9523.864000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9523.888000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9523.888000] 
[ 9525.540000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9525.560000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9525.560000] 
[ 9527.212000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9527.232000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9527.232000] 
[ 9528.884000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9528.904000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9528.904000] 
[ 9530.468000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9530.492000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9530.492000] 
[ 9532.148000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9532.168000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9532.168000] 
[ 9533.736000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9533.756000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9533.756000] 
[ 9535.416000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9535.436000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9535.436000] 
[ 9537.004000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9537.024000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9537.024000] 
[ 9538.680000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9538.700000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9538.700000] 
[ 9540.260000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9540.284000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9540.284000] 
[ 9541.944000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9541.964000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9541.964000] 
[ 9543.544000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9543.564000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9543.564000] 
[ 9545.280000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9545.300000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9545.300000] 
[ 9546.868000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9546.888000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9546.888000] 
[ 9548.540000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9548.560000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9548.560000] 
[ 9550.124000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9550.144000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9550.144000] 
[ 9551.788000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9551.808000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9551.808000] 
[ 9553.372000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9553.392000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9553.392000] 
[ 9555.056000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9555.076000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9555.076000] 
[ 9556.644000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9556.664000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9556.664000] 
[ 9558.328000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 9558.348000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 9558.348000] 
[ 9559.900000] DVB: frontend 0 frequency 866000000 out of range (44250000..864000000)
[ 9560.416000] DVB: frontend 0 frequency 874000000 out of range (44250000..864000000)
[ 9560.916000] DVB: frontend 0 frequency 882000000 out of range (44250000..864000000)
[ 9561.416000] DVB: frontend 0 frequency 890000000 out of range (44250000..864000000)
[ 9561.916000] DVB: frontend 0 frequency 898000000 out of range (44250000..864000000)
[ 9563.416000] xc2028 4-0061: Error on line 1065: -5
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux