Satelco EasyWatch + Cryptoworks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
  following the suggestion by Manu, I ditched the Twinhan VP1032 (which
had problems with the Cryptoworks CAM) and bought a SAA7146-based
Satelco EasyWatch PCI card with CI module.  This gets recognized as
"device 1131/7146 subsystem 1894/001b" and appears to work with the
budget_av + dvb_pll + stv0299 module combination from a vanilla 2.6.24
kernel.

Reception of FTA channels is OK, but the CI section looks even more
problematic than the VP1032's.  The kernel logs

  dvb_ca adapter 0: DVB CAM detected and initialised successfully

However, any attempt to access the CAM fails:

  santinod@romilda:~$ dst_test -c
  main: Capabilities
  APP: Slots=[1]
  APP: Type=[2]
  APP: Descrambler keys=[0]
  APP: Type=[0]

  santinod@romilda:~$ dst_test -i
  main: Info
  No CI Slots found

  santinod@romilda:~$ dst_test -a
  main: App Info
  dst_comms: Msg=[9f 80 30 ]
  dst_comms: ioctl failed ..
  dst_get_app_info: Dst communication failed


Maybe I'm missing something obvious?

Thanks,
 David
-- 
 David Santinoli
 Tieffe Sistemi S.r.l.                      viale Piceno 21, Milano
 www.tieffesistemi.com                         tel. +39 02 76115215

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux