On Fri, 2008-01-25 at 11:36 +0100, Patrick Boettcher wrote: > Hi Mauro, > > Can you please pull from > > http://linuxtv.org/hg/~pb/v4l-dvb/ > > for a bunch of changes for DiBcom-based hardware. > > All users, can you please test, whether I broke something committing all > of that. > > Thanks to everyone who contributed to improved device-quality and > support. I tried this with my "TV-QQ" usb dvb-t device. dmesg gives :- usb 3-4: new high speed USB device using ehci_hcd and address 5 usb 3-4: new device found, idVendor=10b8, idProduct=1e78 usb 3-4: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-4: Product: TV QQ T-03S usb 3-4: Manufacturer: East Sun Inc. usb 3-4: SerialNumber: 086755 usb 3-4: configuration #1 chosen from 1 choice dib0700: loaded with support for 6 different device-types dvb-usb: found a 'DiBcom STK7700P reference design' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' dib0700: firmware started successfully. dvb-usb: found a 'DiBcom STK7700P reference design' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (DiBcom STK7700P reference design) DVB: registering frontend 0 (DiBcom 7000PC)... MT2060: successfully identified (IF1 = 1220) input: IR-receiver inside an USB DVB receiver as /class/input/input9 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: DiBcom STK7700P reference design successfully initialized and connected. But it doesn't appear to tune :- $ dvbscan /usr/share/dvb/scan/dvb-t/uk-CrystalPalace scanning /usr/share/dvb/scan/dvb-t/uk-CrystalPalace using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 505833333 0 3 9 1 0 0 0 >>> tune to: 505833333:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 505833333:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 dumping lists (0 services) Done. Is there anything I can do ? Also, I can't see any sign of analogue ( which, according to the box, this device is supposed to support ). cheers, Pete -- --- Peter Lord ------------------------------------------------------ Please bottom post, for examples, please see http://mailformat.dan.info/quoting/bottom-posting.html and http://www.kassj.com/netiquette/netiquette.html#5 _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
