* "Jan D. Louw" <jd.louw@xxxxxxxxxx> wrote: > > >> * "Jan D. Louw" <jd.louw at mweb.co.za> wrote: > > Hi Tino, > > > > I had a quick look at the zl10036 datasheet and I can't see anything > > obviously wrong. The formulas look OK. There is one wrong assignment: > > > > if (!priv->has_loopthrough) buf[0] |= 0x01; will be fixed > > > > and some wrong comments: > > > > buf[6] = 0xd3; /* 6: from datasheet */ > > buf[7] = 0x40; /* 7: from datasheet */ I will fix this... - the comment was copy'n paste :( > > > > but this shouldn't cause it not to work. I suspect this is some obscure > > writing order bug. The zl10038 datasheet does provide more info on > > registers 8-10 which might prove useful. > > > > Also, maybe some hardware problem (like pin SLEEP asserted) or wrong > crystal freq? The crystal freq is okay. I will look @ the SLEEP PIN issue, maybe thats the fault. Also Matthias Schwarzott has done some work on the patches, maybe he has found the thing already ? Thanks for the fast response ;) -- regards, TR _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
