Looking for some help with this one. Can't figure it out. Both cards are working perfectly fine in Windows XP.
Scanning with Kaffeine 0.8.5 and SCAN (CVS DVB-Tools)
Jan 4 21:16:29 www kernel: cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
Jan 4 21:16:29 www kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
Jan 4 21:16:29 www kernel: ACPI: Unable to derive IRQ for device 0000:00:09.0
Jan 4 21:16:29 www kernel: ACPI: PCI Interrupt 0000:00:09.0[A]: no GSI - using IRQ 5
Jan 4 21:16:29 www kernel: cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected]
Jan 4 21:16:29 www kernel: cx88[0]: TV tuner type 4, Radio tuner type -1
Jan 4 21:16:29 www kernel: cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 5, latency: 64, mmio: 0xde000000
Jan 4 21:16:29 www kernel: cx88[0]/0: registered device video1 [v4l2]
Jan 4 21:16:29 www kernel: cx88[0]/0: registered device vbi1
Jan 4 21:16:29 www kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Jan 4 21:16:29 www kernel: ACPI: Unable to derive IRQ for device 0000:00:09.2
Jan 4 21:16:29 www kernel: ACPI: PCI Interrupt 0000:00:09.2[A]: no GSI - using IRQ 5
Jan 4 21:16:29 www kernel: cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 5, latency: 64, mmio: 0xdd000000
Jan 4 21:16:29 www kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
Jan 4 21:16:29 www kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Jan 4 21:16:29 www kernel: cx88[0]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52]
Jan 4 21:16:29 www kernel: cx88[0]/2: cx2388x based DVB/ATSC card
Jan 4 21:16:29 www kernel: DVB: registering new adapter (cx88[0])
Jan 4 21:16:29 www kernel: DVB: registering frontend 0 (Conexant CX24123/CX24109)...
Jan 4 21:19:12 www kernel: cx8802_request_acquire() Post acquire GPIO=ff
Jan 4 21:19:12 www kernel: cx8802_request_release() Post release GPIO=ff
Jan 4 21:19:13 www kernel: cx8802_request_acquire() Post acquire GPIO=ff
Jan 4 21:19:13 www kernel: cx8802_request_release() Post release GPIO=ff
Jan 4 21:19:15 www kernel: LNB Voltage OFF
Jan 4 21:19:25 www kernel: cx8802_request_acquire() Post acquire GPIO=efff
Jan 4 21:19:25 www kernel: cx24123_set_voltage: setting voltage 13V
Jan 4 21:19:25 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:25 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:25 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:26 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:26 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:26 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:26 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:26 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:26 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:27 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:27 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:27 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:27 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:27 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:27 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:28 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:28 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:28 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:28 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:28 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:28 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:29 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:29 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:29 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:29 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:29 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:29 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:30 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:30 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:30 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:30 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:30 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:30 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:30 www kernel: cx8802_request_release() Post release GPIO=efff
Jan 4 21:19:30 www kernel: cx8802_request_acquire() Post acquire GPIO=efff
Jan 4 21:19:30 www kernel: cx24123_set_voltage: setting voltage 18V
Jan 4 21:19:31 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:31 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:31 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:31 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:31 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:31 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:32 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:32 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:32 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:32 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:32 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:32 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:33 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:33 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:33 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:33 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:33 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:33 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:34 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:34 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:34 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:34 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:34 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:34 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:35 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:35 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:35 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:35 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:35 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:35 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:36 www kernel: cx8802_start_dma w: 752, h: 32, f: 2
Jan 4 21:19:36 www kernel: core->active_type_id = 0x00000001
Jan 4 21:19:36 www kernel: cx8802_start_dma doing .dvb
Jan 4 21:19:36 www kernel: cx8802_request_release() Post release GPIO=efff
Jan 4 21:19:36 www kernel: cx8802_request_acquire() Post acquire GPIO=efff
Jan 4 21:19:36 www kernel: cx24123_set_voltage: setting voltage 13V
hermann pitton <hermann-pitton@xxxxxxxx> wrote:
Hi,
Am Freitag, den 04.01.2008, 10:09 -0500 schrieb Dwaine Garden:
> Maybe this patch?
>
> http://linuxtv.org/hg/v4l-dvb/rev/38287d40ff25
out of interest, does it mean you have excluded already this one
http://linuxtv.org/hg/v4l-dvb/rev/cf687ab6b0ab
and you get 13V and 18V properly set on the older Geniatech,
since the not yet reviewed error on SEC_VOLTAGE_OFF you still have?
Cheers,
Hermann
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
