Hello and Happy Holydays to everyone.
I think I am missing something. In my system I have a working DVB TT
Card with CI. Now I added a S2-3200.
So i compiled and installed succesfully the new multiproto experimental
drivers.
After this, I modprobed stb0899 module (I understand is is the right
module for the card). But the module loads but seems to be not used
# lsmod|grep stb
stb0899 41728 0
The output of lspci -v regarding both cards follows:
04:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Unknown device 5b2f:1081
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at fddff000 (32-bit, non-prefetchable) [size=512]
04:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Unknown device 1017
Flags: bus master, medium devsel, latency 32, IRQ 22
Memory at fddfe000 (32-bit, non-prefetchable) [size=512]
The card is not recognized by all applications, what am I doing wrong?
Thank you
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
