Allan Stirling wrote: > Steven Toth wrote: >> Per Olofsson wrote: >>> Steven Toth wrote: >>>>> Can I ask you then, would it be possible to use the WinTV-CI with >>>>> other cards >>>>> than Hauppauge's own? Could it be used with multiple tuners? >>>>> >>>> Under Linux? You should be able to do whatever you like once a GPL >>>> driver is available. >>> Right, under Linux, that's what I meant. I was wondering because other CI's are >>> usually tied to a specific tuner card and cannot decode anything else which is >>> not passing through it. >> Agreed. Except the Hauppauge products is a fairly straight-forward USB >> device. With the right driver it is able to decode _ANY_ transport >> stream feed through it, providing that the correct CAM and subscriber >> card are inserted. >> >> Check the retail packaging for a ist of which cams are supported. > > I believe there may be a misunderstanding here. > > From what I have read, Per is wanting to use the card as a > 'decryption engine' for a multiple receiving card setup, > using only 1 CI / CAM / Smartcard. As far as I am aware, > there are no DVB cards that can do this. No missunderstanding, you should be able to do this under Linux. - Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
