Re: new driver for: Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022] as card=118 in cardlist.saa7134

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

can someone of you test the S-Video input? That is what is still
untested. 

Am Sonntag, den 23.12.2007, 13:20 +0100 schrieb sioux:
> Hi Terry,
> 
> Fedora 8... dependency list
> I don't know, I use UBUNTU... it loads by default all the saa7134 modules
> 
> Listen FM while DVB-T is running, yes that's right!

No. One single hybrid tuner at 0x60 behind the very same i2c bridge for
analog and digital.

> Merry Christmas and happy new year to you and all members on this lists.
> Sioux.

Yes!

Cheers,
Hermann

> _________________________________________
> Terry Barnaby ha scritto:
> > Hi Sioux,
> >
> > Thanks for the info, I now have FM radio.
> > I had to load the saa7134_alsa module as well to get the ALSA device,
> > my Fedora 8 system had not loaded it by default. I this a minor bug
> > in the module dependency lists ?
> >
> > I presume it is not possible to listen to stream FM radio
> > while streaming DVB TV with this card ?
> >
> > Cheers
> >
> > Terry
> >
> > sioux wrote:
> >> Hi,
> >> I am happy to see my patch is ok.
> >> For audio stream you have to use sox... here is an example:
> >>
> >> sox -r 32000 -w -t alsa hw:1,0 -t alsa hw:0,0
> >>
> >> Ciao
> >> Sioux.
> >>
> >> __________________________________________________
> >>
> >> Terry Barnaby ha scritto:
> >>> Hi,
> >>>
> >>> I have tried the "sioux.patch" on my AzureWave AD-TP500 3056 PCI board.
> >>> With the dvb-fe-tda10045.fw and dvb-fe-tda10046.fw firmware files 
> >>> installed
> >>> in /lib/firmware for Fedora 8. It seems to work fine in DVB mode.
> >>>
> >>> I now want to try the FM Tuner but am at a loss on how to capture a 
> >>> stream
> >>> from this. Eventually I want to stream the FM audio across the network.
> >>> Any info on:
> >>> 1. How can I stream the FM Tuners output using VLC or something else ?
> >>> 2. I can see how to tune set the FM Tuners frequency, but how can I 
> >>> get a raw
> >>>     data stream from the card using the V4L/DVB API ?
> >>>
> >>> Some initial pointers would be appreciated.
> >>>
> >>> Cheers
> >>>
> >>> Terry
> >>>



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux