While the first tuner (0) works fine, the second tuner (1) of the stick finds no channels at all when doing "scan". I get filter timeouts for all frequencies. Using an existing channels.conf does not help. MythTV claims that the signal strength/quality is ok but there is very high BER and no (tuner?) lock or just a partial one. I seem to recall both tuners were working at some point with earlier code from repository. I am at least fairly certain "scan" found at least some channels earlier, no matter which tuner was used. The stick seems to use a DiBcom 7000PC. Thus I wonder if I am seeing the same bug here that Patrick Boettcher mentioned on 22.11. in response to Yousef Lamlum's message on 22.11, since Yousef's device seems to have the same chip/modules??? BTW, I am using the stick with force_lna_activation parameter set to 1, otherwise the sensitivity is too low and even the "working" tuner does not find all the channels. Is this indeed a known issue, or is there something I can do to provide more information, or test something, etc..? Thanks, Petri _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
