On Thu, 2007-12-13 at 23:24 +0100, Luca wrote: > Well... the device seem working properly after I put the firmware in > /lib/firmware... maybe before I was using the wrong one... mah! Now > dib0700 module say me that loads the firmware at ... (really two > different firmwares, 1.10 and 03-pre). As the wiki page says, you need to either: rename the 1.10 firmware file to the 03-pre name symlink 1.10 to 03-pre You are not using the 03-pre at all, but you need the name as the code did not change the hard-coded file name. As with every firmware change, you need to cold boot the device, by either unplugging the stick, or by *shutting off* (not just a reboot) the machine. > > I don't know if it can work with both antennas... I'm playing with > them, > because I think it's an antenna problems... The diversity feature (2 antennas) is certainly *not* supported at this time. > > Kaffein is awesome! But sadly I cannot find any channel... sigh... Make sure you are using the right firmware. Nico _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
