http://dev.kewl.org/hvr4000/ News 5 dec 2007 =============== This is the final diseqc configuration for this driver. See the img/ folder for screenshots of operation. A kernel module parameter now exists named "toneburst". Previous parameter named "desc" has been removed. One new option which completely disables toneburst has been added. The "toneburst" module parameter can have 1 of 3 values: 0: NEVER send tone burst 1: Cache tone burst or derive tone burst from command (default). In some cases a diseqc message may need transmitting twice, yet this is the preferred method. 2: Cache message and send with known toneburst. This method sounds fine except when some applications omit sending the burst when it is needed. The above parameter is also exposed as a sysctl: kernel.cx24116.toneburst This can be set whilst the frontend is offline without reloading the driver to determine what works best for you, eg. sysctl kernel.cx24116.toneburst=0 sysctl kernel.cx24116.toneburst=1 sysctl kernel.cx24116.toneburst=2 It should be understood that the cx24116 firmware can never send a toneburst on it's own, it always has to be sent with a DiSEqC message, else never at all (until proven otherwise). Very old hvr3000+4000 patch has been removed, as has pilot.diff // / {:)==={ Darron Broad <darron AT kewl DOT org> \\ \ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
