Since you are talking about tda182x, I have had some issues in this area, and some with the i2c setup too. I have a lifewalker usb dual digital tuner, which uses tda827x 8324 2 tda1004x 17028 2 dvb_usb_m920x 18308 1 I was using b16ef95c0418/5894 on top of Ubuntu Feisty with 2.6.20. This was fairly stable, however the m920x would start to get some I2C errors after a while, so I was rebooting at 0500 wed morning and that was pretty good. I recently upgraded to Ubuntu Gutsy with 2.6.22, and this was also fairly stable, however I noticed that the second tuner wasn't working. Given the recent comments about backporting tda18211 into tda821x, and not dealing with the second tuner, this makes sense, albeit slightly frustrating. I tried out bd1cc7e65adc/6432 and I'm at least getting both tuners working again, although it is not as stable as 5894. Mike Krufky, you said you didn't have a dual dvb you could test with the tda back port. I do have one it seems, and I would like to get a working dual tuner option back into the mainline kernel. I can build and test kernels/modules, though my familiarity with the linux-dvb modules is low, it could improve with a few pointers. -- Scott Merrilees, Newcastle, Australia _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
