Re: I2C NAKs and fails to respond during init of TDA18211

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Michael Krufky <mkrufky <at> linuxtv.org> writes:

>
> It's not wrong -- it's just missing.
> 
> I said it before -- the driver is not tested with DVB-T --
 I need a test case for it first.  Feel free to send in a
> patch, since you DO have that test case.
> 
> Cheers,
> 
> Mike Krufky
> 

Sadly I have not yet achieved FE_HAS_SIGNAL (TDA10048 reg 1A: FREQ_LOCK)
with _any_ code, though I /have/ had FE_HAS_CARRIER,
FE_HAS_SYNC & FE_HAS_VITERBI.
Hence do not get FE_HAS_LOCK (TDA10048 reg 1A: FEL)
Possibly need to get a spectrum analyser onto the IFOUT pins
to see why the 10048 is not achieving proper lock.

May be a 10048 setup mismatch ...

On that basis I am not willing to submit patches, until I have
demonstrably working tuning !

Regards
MikeW

PS. One of the RF techies said that silicon tuners were _much_
harder work than "can" tuners, hence the increase in s/w needed
to work them ...



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux