[Patch] Removing duplicated KERN_DEBUG from dprintk calls in mt312.c

[Matthias Schwarzott <zzam@xxxxxxxxxx>]

Hi list!

This patch removes duplicated KERN_DEBUG flags from dprintk calls in mt312.c

This is the definition of dprintk there:
#define dprintk(args...) \
        do { \
                if (debug) printk(KERN_DEBUG "mt312: " args); \
        } while (0)


most calls look like this:
dprintk("R(%d)", reg & 0x7f);

but some do:
dprintk(KERN_DEBUG "sr(auto) = %u\n",
                       mt312_div(monitor * 15625, 4));

The attached patch removes the duplicated KERN_DEBUG flag.

Greetings
Matthias

-- 
Matthias Schwarzott (zzam)

This patch removes duplicated KERN_DEBUG flags from dprintk calls in mt312.c.

#define dprintk(args...) \
        do { \
                if (debug) printk(KERN_DEBUG "mt312: " args); \
        } while (0)

So no caller need to specify KERN_DEBUG.

Signed-off-by: Matthias Schwarzott <zzam@xxxxxxxxxx>

Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/mt312.c
+++ v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
@@ -181,7 +181,7 @@ static int mt312_get_symbol_rate(struct 
 
 		monitor = (buf[0] << 8) | buf[1];
 
-		dprintk(KERN_DEBUG "sr(auto) = %u\n",
+		dprintk("sr(auto) = %u\n",
 		       mt312_div(monitor * 15625, 4));
 	} else {
 		if ((ret = mt312_writereg(state, MON_CTRL, 0x05)) < 0)
@@ -197,9 +197,9 @@ static int mt312_get_symbol_rate(struct 
 
 		sym_rat_op = (buf[0] << 8) | buf[1];
 
-		dprintk(KERN_DEBUG "sym_rat_op=%d dec_ratio=%d\n",
+		dprintk("sym_rat_op=%d dec_ratio=%d\n",
 		       sym_rat_op, dec_ratio);
-		dprintk(KERN_DEBUG "*sr(manual) = %lu\n",
+		dprintk("*sr(manual) = %lu\n",
 		       (((MT312_PLL_CLK * 8192) / (sym_rat_op + 8192)) *
 			2) - dec_ratio);
 	}
@@ -376,7 +376,7 @@ static int mt312_read_status(struct dvb_
 	if ((ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status))) < 0)
 		return ret;
 
-	dprintk(KERN_DEBUG "QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]);
+	dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]);
 
 	if (status[0] & 0xc0)
 		*s |= FE_HAS_SIGNAL;	/* signal noise ratio */
@@ -422,7 +422,7 @@ static int mt312_read_signal_strength(st
 
 	*signal_strength = agc;
 
-	dprintk(KERN_DEBUG "agc=%08x err_db=%hd\n", agc, err_db);
+	dprintk("agc=%08x err_db=%hd\n", agc, err_db);
 
 	return 0;
 }

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb