> Tomi Orava wrote: >> >> > Tomi Orava schrieb: >> >> I tried your patch and for me it resulted the following constant >> >> complaints: >> >> >> >> saa7146 (0): saa7146_wait_for_debi_done_sleep timed out while waiting >> >> for >> >> transfer completion >> >> saa7146 (0): saa7146_wait_for_debi_done_sleep timed out while waiting >> >> for >> >> transfer completion >> >> saa7146 (0): saa7146_wait_for_debi_done_sleep timed out while waiting >> >> for >> >> transfer completion >> >> >> >> The above complaint started as soon MythBackend started hopping from >> >> channel to channel and gathering EIT-information. These messages came >> >> every once couple of minutes until I stopped the test run. >> > >> > Oliver did changed two DEB_S() to printk. If you replace the DEB_S() >> with >> > printk (or enable debug >> > output) in saa7146_wait_for_debi_done() within a clean tree, probably >> you >> > will get the same messages. >> >> You are correct. I do get the same message if I change the DEB_S to >> printk >> for a test run. Any ideas how to modify the system/settings not to error >> all the time >> (and I don't mean the actual error message) ? Somehow I think that this >> machine should finally be capable of handling all three DVB-C cards >> without hicups >> (AMD X2 5600, asus crosshair etc etc). > > AFAICS the budget-av driver is triggering the log messages. > Is a CI connected to the Satelco EasyWatch DVB-C MK3? > > If not I guess that the DEBI timeouts are normal because there is no > hardware connected to the debi bus. In this case I'd have to revert the > code to 'DEBI_S' because those timeouts are normal. ;-( No, I don't have CI connected to any of the cards. I'm happy to know that this is nothing to worry about ... :) So, overall your patch seems to work just fine if I forget those couple of additional syslog msgs. Regards, Tomi Orava _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
