Tomi Orava wrote: > > > Tomi Orava schrieb: > >> I tried your patch and for me it resulted the following constant > >> complaints: > >> > >> saa7146 (0): saa7146_wait_for_debi_done_sleep timed out while waiting > >> for > >> transfer completion > >> saa7146 (0): saa7146_wait_for_debi_done_sleep timed out while waiting > >> for > >> transfer completion > >> saa7146 (0): saa7146_wait_for_debi_done_sleep timed out while waiting > >> for > >> transfer completion > >> > >> The above complaint started as soon MythBackend started hopping from > >> channel to channel and gathering EIT-information. These messages came > >> every once couple of minutes until I stopped the test run. > > > > Oliver did changed two DEB_S() to printk. If you replace the DEB_S() with > > printk (or enable debug > > output) in saa7146_wait_for_debi_done() within a clean tree, probably you > > will get the same messages. > > You are correct. I do get the same message if I change the DEB_S to printk > for a test run. Any ideas how to modify the system/settings not to error > all the time > (and I don't mean the actual error message) ? Somehow I think that this > machine should finally be capable of handling all three DVB-C cards > without hicups > (AMD X2 5600, asus crosshair etc etc). AFAICS the budget-av driver is triggering the log messages. Is a CI connected to the Satelco EasyWatch DVB-C MK3? If not I guess that the DEBI timeouts are normal because there is no hardware connected to the debi bus. In this case I'd have to revert the code to 'DEBI_S' because those timeouts are normal. ;-( CU Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.4.0: http://www.escape-edv.de/endriss/vdr/ ---------------------------------------------------------------- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
