RE : Re: support from cx23885 driver and Xc3028 tuner for HP/Hauppauge WinTv885 mod 77001

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Devs, Dear Mike,
as you requested here below is the output of 'modprobe cx23885 i2c_scan=1'
I'm not going to make any pressure on you, however please consider I'm available for any beta testing work or any other help that could ease your work.

I did a little googling for the tuning chip xc3028 and found George Kiagiadakis (Gkiagia) has already started working on it http://mcentral.de/wiki/index.php/Xc3028 (http://mcentral.de/firmware/firmware_v4.tgz I tried copying these firmwares inside /lib/firmware/linux-blahblah/ but Kaffeine is still not able to scan for channels) maybe I should try with the experimental trunk, so far I used a mercurial snapshot of http://linuxtv.org/hg/v4l-dvb trunk.

If you need any more information please do not hesitate to send me an email!
In the meantime I thank you for your efforts and wish you a good work.

192000] cx23885 driver version 0.0.1 loaded
192000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
192000] CORE cx23885[0]: subsystem: 0070:7717, board: UNKNOWN/GENERIC [card=0,autodetected]
292000] cx23885[0]: i2c bus 0 registered
304000] cx23885[0]: i2c scan: found device @ 0xa0  [eeprom]
312000] cx23885[0]: i2c bus 1 registered
328000] cx23885[0]: i2c bus 2 registered
332000] cx23885[0]: i2c scan: found device @ 0x66  [???]
332000] cx23885[0]: i2c scan: found device @ 0x88  [cx25837]
332000] cx23885[0]: i2c scan: found device @ 0x98  [???]
364000] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 17, latency: 0, mmio: 0xf4000000

Michael Krufky <mkrufky@xxxxxxxxxxx> a écrit :
It would be helpful to see the output of 'modprobe cx23885 i2c_scan=1' ,
after first doing 'modprobe -r cx23885' -- I have this card also, and
I'd like to make sure that we have the same revision.

I started working on this one, but I've been held up due to firmware
issues-- So far, the working ATSC linux drivers for the xc3028 have all
worked when coupled with an LGDT3303 demod. In your device, we have a
Samsung demodulator, instead. The xc3028 requires a different firmware
image in this case, and I haven't yet found time to work that out.

I'd expect to have the details sorted within the next month or so, but I
don't want to make any promises.

HTH,

Mike



Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux