O&M Ugarcina wrote: > Linux video capture interface: v2.00 > PCI: Enabling device 0000:00:1f.3 (0001 -> 0003) > ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20 > saa7130/34: v4l2 driver version 0.2.14 loaded > ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 21 > saa7130[0]: found at 0000:04:01.0, rev: 1, irq: 21, latency: 64, mmio: > 0xfeaffc00 > saa7130[0]: subsystem: 185b:c900, board: Compro Videomate DVB-T300 > [card=70,insmod option] > saa7130[0]: board init: gpio is 843f00 > input: saa7134 IR (Compro Videomate DV as /class/input/input4 > saa7130[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 > b2 92 > saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff > ff ff > saa7130[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff > ff ff > saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7130[0]: i2c eeprom 40: ff d6 00 c0 86 1c 02 01 02 ff ff ff ff ff > ff ff > saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff cb > saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7130[0]: i2c eeprom 70: 00 00 00 10 03 9c ff ff ff ff ff ff ff ff > ff ff > tuner 1-0068: chip found @ 0xd0 (saa7130[0]) > saa7130[0]: registered device video0 [v4l2] > saa7130[0]: registered device vbi0 > saa7130[0]/dvb: frontend initialization failed Then it is not an exact clone of Compro Videomate DVB-T300. You can try looking at the card, writing down the chip numbers, searching for ones that exist in http://www.linuxtv.org/hg/v4l-dvb/file/7dba1f554c4a/linux/Documentation/video4linux/CARDLIST.tuner, and adding the "tuner=XX" option to the saa7134 module. Not sure, however, if this makes sense at all for DVB-S cards. -- Alexander E. Patrakov _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
