Hi, I'd appreciate any help in getting my USB DVB-t stick (DViCO FusionHDTV DVB-T NANO) to work on opensuse 10.2. I'm not a linux guru and have worked my way through the web postings that I can make sense of. I'm not sure how severe the problem I've run into is: Is it simple to fix/workaround? Or should I consider moving on? I have to plug the USB stick in twice, before I see the following in /var/log/messages Sep 25 19:17:03 mv-laptop kernel: usb 1-8: new high speed USB device using ehci_hcd and address 7 Sep 25 19:17:06 mv-laptop kernel: usb 1-8: device descriptor read/64, error -110 Sep 25 19:18:20 mv-laptop kernel: usb 1-8: new high speed USB device using ehci_hcd and address 8 Sep 25 19:18:20 mv-laptop kernel: usb 1-8: new device found, idVendor=0fe9, idProduct=db70 Sep 25 19:18:20 mv-laptop kernel: usb 1-8: new device strings: Mfr=0, Product=0, SerialNumber=0 Sep 25 19:18:20 mv-laptop kernel: usb 1-8: configuration #1 chosen from 1 choice Sep 25 19:18:21 mv-laptop kernel: dvb-usb: found a 'DViCO FusionHDTV DVB-T NANO2' in warm state. Sep 25 19:18:21 mv-laptop kernel: dvb-usb: bulk message failed: -22 (2/-1069664350) Sep 25 19:18:21 mv-laptop kernel: i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips Sep 25 19:18:21 mv-laptop kernel: i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips Sep 25 19:18:21 mv-laptop kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Sep 25 19:18:21 mv-laptop kernel: DVB: registering new adapter (DViCO FusionHDTV DVB-T NANO2) Sep 25 19:18:23 mv-laptop kernel: dvb-usb: bulk message failed: -110 (1/0) Sep 25 19:18:25 mv-laptop kernel: dvb-usb: bulk message failed: -110 (3/0) Sep 25 19:18:27 mv-laptop kernel: dvb-usb: bulk message failed: -110 (3/0) Sep 25 19:18:29 mv-laptop kernel: dvb-usb: bulk message failed: -110 (5/0) Sep 25 19:18:29 mv-laptop kernel: dvb-usb: no frontend was attached by 'DViCO FusionHDTV DVB-T NANO2' Sep 25 19:18:29 mv-laptop kernel: dvb-usb: DViCO FusionHDTV DVB-T NANO2 successfully initialized and connected. Sep 25 19:18:29 mv-laptop kernel: usbcore: registered new driver dvb_usb_cxusb MyhtTV etc seems to want a frontend0 device and as far as I can tell this has not been created due possibly to the "SMBus Quick command not supported" error or some other problem. I'd appreciate any help. Regards Mark _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
