Re: DiB0700 firmware - next try

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Soeren,

I'm just working out how I can free up my single epia pci slot (currently 
running my sata card) so I can persue the pci dvb solution...  Is there 
anything recommended with solid support? (as I mistakenly thought nova-t in 
all its incarnations worked so don't want to make the same mistake twice!)  
I've been messing about with my freecom and nova-t usb sticks for so long now 
that I can't wait to stop tinkering (which is something I thought I'd never 
say! :) )

On Friday 21 September 2007 19:23:02 Soeren Sonnenburg wrote:
> On Thu, 2007-09-20 at 13:35 +0100, David Harvey wrote:
> > I'm still experiencing usb-disconnects with the new (1.10
> > firmware).   Nothing in dmesg to help other than the disconnect
> > statement (usb 4-3: USB disconnect, address 2).  Im using a via epia
> > pd1000 and have suffered similar problems with my freecom dvb stick
> > (which at least doesn't hang the usb bus when it eventually falls on
> > its face) Are there any known issues with epia hardware? and can
> > others confirm that this new firmware is definitely fixing their usb
> > disconnects? The stick is is a nova-t with dib0700 (can provide more
>
> It is definitely caused by the dibcom (driver or hardware) based sticks.
> I have a completely different chipset (via) and 2 different dibcom based
> dongles showed the very same problem.
>
> So relax and get some supported pci card or so instead.
>
> Soeren



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux