All, I've started trying to get the above working and have hit a wall (not literally). My current setup has a Nova-T and a WinTV34xx installed and working with the S2 being a new addition. I have downloaded and compiled and installed the drivers from here: http://linuxtv.org/hg/~stoth/hvr4000/ And, on a reboot, my dmesg looks like this: saa7146: register extension 'budget dvb'. saa7146: found saa7146 @ mem f098e000 (revision 1, irq 11) (0x13c2,0x1005). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI). adapter has MAC addr = 00:d0:5c:20:2e:c5 DVB: registering frontend 0 (LSI L64781 DVB-T)... Linux video capture interface: v2.00 cx2388x v4l2 driver version 0.0.6 loaded CORE cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe tveeprom 3-0050: Hauppauge model 34705, rev E111, serial# 6197767 tveeprom 3-0050: tuner model is Philips FI1246 MK2 (idx 11, type 1) tveeprom 3-0050: TV standards PAL(I) (eeprom 0x10) tveeprom 3-0050: audio processor is CX881 (idx 31) tveeprom 3-0050: has radio cx88[0]: warning: unknown hauppauge model #34705 cx88[0]: hauppauge eeprom: model=34705 input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input4 cx88[0]/0: found at 0000:02:07.0, rev: 3, irq: 10, latency: 32, mmio: 0xd2000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 CORE cx88[1]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=58,autodetected] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe tveeprom 4-0050: Hauppauge model 69100, rev B2C3, serial# 2650487 tveeprom 4-0050: MAC address is 00-0D-FE-28-71-77 tveeprom 4-0050: tuner model is Conexant CX24118A (idx 123, type 4) tveeprom 4-0050: TV standards ATSC/DVB Digital (eeprom 0x80) tveeprom 4-0050: audio processor is None (idx 0) tveeprom 4-0050: decoder processor is CX882 (idx 25) tveeprom 4-0050: has no radio, has IR receiver, has no IR transmitter cx88[1]: hauppauge eeprom: model=69100 input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input5 cx88[1]/0: found at 0000:02:08.0, rev: 5, irq: 5, latency: 32, mmio: 0xd4000000 cx88[1]/0: registered device video1 [v4l2] cx88[1]/0: registered device vbi1 It looks like the card is being detected and I'm getting a /dev/v4l/video1 device (unexpected), but no additional dvb device in /dev/dvb - just the Nova-T's adapter0 Kernel is 2.6.22-gentoo-r5. lsmod is: snd_pcm_oss 35232 1 snd_mixer_oss 15744 1 snd_pcm_oss snd_seq_oss 29568 0 snd_seq_midi_event 7936 1 snd_seq_oss snd_seq 38320 4 snd_seq_oss,snd_seq_midi_event snd_usb_audio 52064 1 snd_usb_lib 13952 1 snd_usb_audio snd_rawmidi 17440 1 snd_usb_lib snd_seq_device 8328 2 snd_seq_oss,snd_rawmidi snd_hwdep 9220 1 snd_usb_audio snd_hda_intel 203032 1 snd_pcm 51844 3 snd_pcm_oss,snd_usb_audio,snd_hda_intel snd_timer 17156 2 snd_seq,snd_pcm snd 34020 14 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hwdep,snd_hda_intel,snd_pcm,snd_timer snd_page_alloc 9736 2 snd_hda_intel,snd_pcm cx8800 29064 1 cx88xx 62244 1 cx8800 ir_common 33284 1 cx88xx i2c_algo_bit 9092 1 cx88xx video_buf 22276 2 cx8800,cx88xx tveeprom 17424 1 cx88xx videodev 28032 3 cx8800,cx88xx v4l1_compat 15620 1 videodev compat_ioctl32 5120 1 cx8800 v4l2_common 18432 3 cx8800,cx88xx,videodev btcx_risc 7688 2 cx8800,cx88xx budget 14084 1 budget_core 11908 1 budget saa7146 17928 2 budget,budget_core ttpci_eeprom 6016 1 budget_core dvb_core 73768 2 budget,budget_core l64781 9988 1 kvm_intel 19340 0 kvm 54832 1 kvm_intel lirc_mceusb2 13060 1 lirc_dev 14452 1 lirc_mceusb2 nvidia 7240340 76 I've looked at the ML archives and the Wiki, but can't find any hints there - do I need firmware? Cheers, Rich. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
