Re: free channels not working on mux with crypted channels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/29/2007 02:35 PM, P. van Gaans wrote:
> On 08/29/2007 02:20 PM, Petri Jarvisalo wrote:
>> Ok, this far i know.
>>
>> 1:
>> I asked on #kaffeine, when ever the problem is software based.
>>    - Wasn't.
>> 2:
>> I also had a chat on #linuxtv:
>> - not problem with bad signal or cabling
>> I also compiled latest v4l from snapshot.
>> final statment: mailing list time.
>>
>> Card is Hauppauge DVB-C ver 2.1 (wintv?) with saa7146_vv (latest snapshot)
>> So problem is what topic says, everything else works like a dream.
>>
>> not working (free) channel:
>> reaby@reaby-desktop:~$ czap -c channels.conf MTV3
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>  10 MTV3:418000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_128:305:561:49
>>  10 MTV3: f 418000000, s 6900000, i 2, fec 0, qam 4, v 0x131, a 0x231
>> status 00 | signal 7f7f | snr 0000 | ber 001517c4 | unc 00000038 |
>> status 1f | signal f0f0 | snr ebeb | ber 001517c4 | unc ffffffff |
>> FE_HAS_LOCK
>> status 1f | signal ffff | snr eaea | ber 001517c4 | unc ffffffff |
>> FE_HAS_LOCK
>> status 1f | signal ffff | snr eaea | ber 000d7b72 | unc ffffffff |
>> FE_HAS_LOCK
>>
>> encrypted channel (from same mux):
>> reaby@reaby-desktop:~$ czap -c channels.conf "Subtv Juniori"
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>  18 Subtv
>> Juniori:418000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_128:517:610:257
>>  18 Subtv Juniori: f 418000000, s 6900000, i 2, fec 0, qam 4, v 0x205, a
>> 0x262
>> status 00 | signal 3e3e | snr 0000 | ber 0000037a | unc ffffffff |
>> status 1f | signal f7f7 | snr e3e3 | ber 0000037a | unc ffffffff |
>> FE_HAS_LOCK
>> status 1f | signal ffff | snr eaea | ber 0000037a | unc ffffffff |
>> FE_HAS_LOCK
>> status 1f | signal ffff | snr eaea | ber 000c0cce | unc ffffffff |
>> FE_HAS_LOCK
>>
>> working channel:
>> reaby@reaby-desktop:~$ czap -c channels.conf "YLE TV1"
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>  21 YLE TV1:162000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_128:512:650:17
>>  21 YLE TV1: f 162000000, s 6900000, i 2, fec 0, qam 4, v 0x200, a 0x28a
>> status 00 | signal 7878 | snr 0000 | ber 00054dbc | unc 0000007c |
>> status 1f | signal f3f3 | snr ebeb | ber 00054dbc | unc ffffffff |
>> FE_HAS_LOCK
>> status 1f | signal ffff | snr ecec | ber 00054dbc | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal ffff | snr ecec | ber 0006c49e | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal ffff | snr ecec | ber 0006c49e | unc 00000000 |
>> FE_HAS_LOCK
>>
>> stream example on problematic channel, recorded from kaffeine:
>> http://purkki.zapto.org/temp/%20Uutiset.m2t (patience it's only 512 adsl)
>>
>> Those problematic channels works fine on hardware digibox on same appartment.
>>
>>
>> _______________________________________________
>> linux-dvb mailing list
>> linux-dvb@xxxxxxxxxxx
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
> 
> I notice the working channel is in the VHF range and the non-working in 
> the UHF-range.
> 
> Did you try another PCI slot?
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 

Excuse me, both are in the VHF range.

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux