I have a Gentoo box running 2.6.21-gentoo-r4 kernel with three DVB cards
(four tuners) in it.
A DigitalNow TinyUSB2 USB-based one [Twinhan VP7045/46 USB DVB-T]
A DiVCO dual tuner (1 x PCI and 1 x USB) [DViCO FusionHDTV DVB-T Dual USB]
A Nebula PCI tuner [Nebula Electronics DigiTV]
When the modules load, the following occurs:
----
# dmesg | grep front
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
DVB: registering frontend 1 (Twinhan VP7045/46 USB DVB-T)...
DVB: registering frontend 0 (NxtWave NXT6000 DVB-T)...
DVB: registering frontend 2 (Zarlink ZL10353 DVB-T)...
----
You will notice that the NEbula frontend (NXT6000) overwrites the
frontend number for one of the DiVCO frontends.
I see two ways around this:
- Forcing the frontends to load in a particular slot number.
- Forcing the nxt6000 to load after all the other frontends have loaded.
I'm not sure how to do the first option, and I've tried using the
blacklist file, as well as renaming the nxt6000 module so it can't load
until manually renamed and the module loaded.
Can anyone suggest any methods for resolving this?
Making the nxt6000 module not load automatically would be the easiest,
but neither the blacklist method not renaming the file seems to work.
Are there hidden options available when loading the modules??
Note: At one stage I had all frontends loading correctly but had to
reload Linux on the HTPC and now have this issue.
dmesg and lsmod output posted below:
DMESG:
Linux version 2.6.21-gentoo-r4 (root@pvr) (gcc version 4.1.2 (Gentoo
4.1.2)) #1 SMP Sun Jul 15 00:18:24 EST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f800 end:
000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size: 0000000000000800 end:
00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end:
0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003f6f0000 end:
000000003f7f0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003f7f0000 size: 0000000000003000 end:
000000003f7f3000 type: 4
copy_e820_map() start: 000000003f7f3000 size: 000000000000d000 end:
000000003f800000 type: 3
copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end:
00000000f4000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end:
0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4e30
Entering add_active_range(0, 0, 260080) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 260080
early_node_map[1] active PFN ranges
0: 0 -> 260080
On node 0 totalpages: 260080
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 239 pages used for memmap
HighMem zone: 30465 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP 000F6790, 0014 (r0 GBT )
ACPI: RSDT 3F7F3040, 0030 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: FACP 3F7F30C0, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: DSDT 3F7F3180, 396D (r1 GBT AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 3F7F0000, 0040
ACPI: MCFG 3F7F6C00, 003C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: APIC 3F7F6B40, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:b0800000)
Built 1 zonelists. Total pages: 258049
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192
real_root=/dev/sda5 udev dolvm2 dresume2=swap:/dev/sda3 highres=off nohz=off
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c052d000 soft=c050d000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2992.781 MHz processor.
Speakup v-2.00 CVS: Fri Apr 13 13:49:34 EDT 2007 : initialized
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1022760k/1040320k available (3073k kernel code, 16816k reserved,
787k data, 240k init, 122816k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04cc000 - 0xc0508000 ( 240 kB)
.data : 0xc0400666 - 0xc04c5414 ( 787 kB)
.text : 0xc0100000 - 0xc0400666 (3073 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5989.29 BogoMIPS
(lpj=29946498)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000
0000441d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00100000 00000000 00003180 0000441d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c052e000 soft=c050e000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5985.20 BogoMIPS
(lpj=29926045)
CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000
0000441d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00100000 00000000 00003180 0000441d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
Total of 2 processors activated (11974.50 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=3
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub
with MMCONFIG support.
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
libata version 2.20 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:06: ioport range 0x400-0x4bf could not be reserved
pnp: 00:07: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:08: iomem range 0xd0000-0xd7fff has been reserved
pnp: 00:08: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:08: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:08: iomem range 0xfc000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: d0000000-d2ffffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-afff
MEM window: d3000000-d6ffffff
PREFETCH window: d7000000-d70fffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2946k freed
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1184522313.920:1): initialized
highmem bounce pool size: 64 pages
squashfs: version 3.2 (2007/01/02) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers,
no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jul 15 2007 00:14:35) installed
Lock_Nolock (built Jul 15 2007 00:15:21) installed
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
intel_rng: FWH not detected
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
ata_piix 0000:00:1f.2: version 2.10ac1
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001d402 bmdma 0x0001e000
irq 17
ata2: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001dc02 bmdma 0x0001e008
irq 17
scsi0 : ata_piix
ata1.00: ATA-7: ST3400633AS, 3.AAD, max UDMA/133
ata1.00: 781420655 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI, max UDMA/100
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi1 : ata_piix
ata2.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3400633AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
sda13 sda14 sda15 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
scsi 1:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Freeing unused kernel memory: 240k freed
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd7104000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usb 1-7: new high speed USB device using ehci_hcd and address 4
usb 1-7: configuration #1 chosen from 1 choice
usb 1-8: new high speed USB device using ehci_hcd and address 5
usb 1-8: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000b400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input0
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@xxxxxxxxxx
JFS: nTxBlock = 8018, nTxLock = 64144
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
ReiserFS: sda5: journal params: device sda5, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
Real Time Clock Driver v1.12ac
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sd 1:0:0:0: Attached scsi generic sg2 type 0
input: PC Speaker as /class/input/input2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 945G Chipset.
agpgart: AGP aperture is 256M @ 0x0
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20
skge 1.10 addr 0xd6000000 irq 20 chip Yukon-Lite rev 9
skge eth0: addr 00:16:e6:63:c4:46
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Linux video capture interface: v2.00
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx2388x v4l2 driver version 0.0.6 loaded
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
dvb-usb: found a 'Twinhan USB2.0 DVB-T receiver (TwinhanDTV
Alpha/MagicBox II)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Twinhan USB2.0 DVB-T receiver (TwinhanDTV
Alpha/MagicBox II)).
dvb-usb: MAC address: 08:ca:19:53:1e:ff
DVB: registering frontend 0 (Twinhan VP7045/46 USB DVB-T)...
input: IR-receiver inside an USB DVB receiver as /class/input/input3
dvb-usb: schedule remote query interval to 400 msecs.
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
dvb-usb: Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)
successfully initialized and connected.
dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)...
input: IR-receiver inside an USB DVB receiver as /class/input/input4
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and
connected.
usbcore: registered new interface driver dvb_usb_vp7045
usbcore: registered new interface driver dvb_usb_cxusb
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 17
bttv0: Bt878 (rev 17) at 0000:02:01.0, irq: 17, latency: 32, mmio:
0xd7000000
bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID
is 0071:0101
bttv0: using: Nebula Electronics DigiTV [card=104,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ff00cb [init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "dvb0"
input: bttv IR (card=104) as /class/input/input5
CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual
Digital [card=44,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
bt878: AUDIO driver version 0.0.0 loaded
usb 1-8: USB disconnect, address 5
dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully deinitialized and
disconnected.
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:02:02.2[A] -> GSI 18 (level, low) -> IRQ 19
cx88[0]/2: found at 0000:02:02.2, rev: 5, irq: 19, latency: 32, mmio:
0xd4000000
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19
cx88[0]/0: found at 0000:02:02.0, rev: 5, irq: 19, latency: 32, mmio:
0xd3000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:01.1[A] -> GSI 19 (level, low) -> IRQ 17
bt878_probe: card id=[0x1010071],[ Nebula Electronics DigiTV ] has DVB
functions.
bt878(0): Bt878 (rev 17) at 02:01.1, irq: 17, latency: 32, memory:
0xd7001000
usb 1-8: new high speed USB device using ehci_hcd and address 6
usb 1-8: configuration #1 chosen from 1 choice
dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in cold state, will
try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-bluebird-01.fw'
usb 1-8: USB disconnect, address 6
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
DVB: registering new adapter (bttv0).
DVB: registering frontend 1 (NxtWave NXT6000 DVB-T)...
usb 1-8: new high speed USB device using ehci_hcd and address 7
usb 1-8: configuration #1 chosen from 1 choice
dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
DVB: registering frontend 2 (Zarlink ZL10353 DVB-T)...
input: IR-receiver inside an USB DVB receiver as /class/input/input6
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and
connected.
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
Adding 987988k swap on /dev/sda3. Priority:-1 extents:1 across:987988k
skge eth4: enabling interface
skge eth4: Link is up at 100 Mbps, full duplex, flow control both
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
---
LSMOD:
Module Size Used by
nfsd 76072 13
exportfs 7936 1 nfsd
snd_bt87x 13284 0
nxt6000 9476 1
dvb_bt8xx 15620 1
sky2 36488 0
bt878 11880 1 dvb_bt8xx
zl10353 7944 1
mt352 8196 0
dvb_usb_cxusb 18436 0
dvb_usb_vp7045 10756 1
dvb_usb 20364 2 dvb_usb_cxusb,dvb_usb_vp7045
dvb_core 55848 2 dvb_bt8xx,dvb_usb
dvb_pll 12036 3 dvb_usb_cxusb,dvb_usb
bttv 152180 2 dvb_bt8xx,bt878
firmware_class 10112 3 dvb_bt8xx,dvb_usb,bttv
cx8800 27128 0
compat_ioctl32 4736 2 bttv,cx8800
cx8802 16132 0
cx88xx 56100 2 cx8800,cx8802
ir_common 27268 2 bttv,cx88xx
i2c_algo_bit 9736 2 bttv,cx88xx
tveeprom 15248 2 bttv,cx88xx
videodev 26112 3 bttv,cx8800,cx88xx
v4l2_common 14592 4 bttv,cx8800,cx88xx,videodev
v4l1_compat 15236 2 bttv,videodev
btcx_risc 6792 4 bttv,cx8800,cx8802,cx88xx
video_buf 18052 4 bttv,cx8800,cx8802,cx88xx
snd_hda_intel 18072 0
snd_hda_codec 165632 1 snd_hda_intel
snd_pcm 47364 3 snd_bt87x,snd_hda_intel,snd_hda_codec
snd_timer 18052 1 snd_pcm
snd 33380 5
snd_bt87x,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
snd_page_alloc 10120 3 snd_bt87x,snd_hda_intel,snd_pcm
i2c_i801 10256 0
skge 34832 0
intel_agp 20892 1
agpgart 22868 1 intel_agp
pcspkr 5888 0
sg 26780 0
rtc 12824 0
dm_bbr 13856 0
dm_snapshot 16548 0
tg3 92932 0
e1000 96320 0
nfs 95040 0
lockd 48520 3 nfsd,nfs
sunrpc 115292 9 nfsd,nfs,lockd
jfs 147692 0
dm_mirror 19092 0
dm_mod 40652 8 dm_bbr,dm_snapshot,dm_mirror
pdc_adma 10116 0
sata_mv 17288 0
ahci 18308 0
sata_qstor 10372 0
sata_vsc 10116 0
sata_uli 9220 0
sata_sis 10628 0
pata_sis 13068 1 sata_sis
sata_sx4 13700 0
sata_nv 17796 0
sata_via 12164 0
sata_svw 9348 0
sata_sil24 14212 0
sata_sil 11912 0
sata_promise 12292 0
sbp2 20356 0
ohci1394 31152 0
ieee1394 61368 2 sbp2,ohci1394
sl811_hcd 13184 0
usbhid 22624 0
ohci_hcd 19588 0
uhci_hcd 21772 0
usb_storage 59840 0
ehci_hcd 27404 0
usbcore 88584 10
dvb_usb_cxusb,dvb_usb_vp7045,dvb_usb,sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
