Hi,
I got an Avermedia AverTV DVB-T USB2.0 (a800) recently. It works fine under WindowsXP. Today I tried it under Ubuntu 6.06.
I downloaded http://www.linuxtv.org/downloads/firmware/dvb-usb-avertv-a800-02.fw and put it in /lib/firmware on my PC. Then connect the box to my PC.
dmesg gave correct information I think.
[17179592.224000] dvb-usb: found a 'AVerMedia AverTV DVB-T USB 2.0 (A800)' in warm state.
[17179592.224000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[17179592.224000] DVB: registering new adapter (AVerMedia AverTV DVB-T USB 2.0 (A800)).
[17179592.224000] dib3000: Found a DiBcom 3000P.
[17179592.224000] DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)...
[17179592.224000] input: IR-receiver inside an USB DVB receiver as /class/input/input5
[17179592.224000] dvb-usb: schedule remote query interval to 150 msecs.
[17179592.224000] dvb-usb: AVerMedia AverTV DVB-T USB 2.0 (A800) successfully initialized and connected.
[17179592.224000] usbcore: registered new driver dvb_usb_a800
lsusb also listed the device correctly.
Bus 005 Device 003: ID 07ca:a801 AVerMedia Technologies, Inc.
lsmod shows the drivers
dvb_usb_a800 5636 0
dvb_usb_dibusb_common 8068 1 dvb_usb_a800
dib3000mc 15744 1 dvb_usb_dibusb_common
dib3000_common 2560 1 dib3000mc
dvb_usb 18952 2 dvb_usb_a800,dvb_usb_dibusb_common
i2c_core 21904 3 i2c_acpi_ec,dib3000_common,dvb_usb
dvb_pll 11012 2 dvb_usb_dibusb_common,dvb_usb
usbcore 130692 6 dvb_usb_a800,dvb_usb,usbhid,ehci_hcd,uhci_hcd
Then I use dvb-apps (scan and szap), however, both failed. I'm sure there is signal on the air and the parameters are set correctly.
Do anybody have any idea? I can provide more information if needed. Thanks.
Best Regards,
Kelvin Wang
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
