On Monday 21 May 2007 22:36, laasa wrote: > Yesterday I have my first DVB-S2-streams with the TT3200. > > Sources > - Manus snapshot at http://jusst.de/manu/stb0899-v4l-dvb.tar.bz2 > - the szap-sources from http://dev.kewl.org/tmp/hvr4000/szap2.tgz > > > Envoirenment > - TT3200 (SAA7146AH, STB0899 C2L, STB6100, LNBP21 PD, 27000 MHz, board B2S3000 Rev 1.0 TT2006.1) > => may be that the skystar HD is worked like TT3200 with that patch > - Tested succesfully with > => Linux-Kernel 2.6.16-45 (from kernel.org) > => 2.6.17-chw-8 (MythTV R5D1) and > => 2.6.21.1 (from kernel.org) > - 32-bit-CPU (Pentium 4, 2.8 GHz with Hyperthreading) => Have no 64-bit- and no SMP-system! Thanks for your work. I tested this with: - linux 2.6.21-5 - Technisat SkyStar HD - AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ 02:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH Unknown device 1019 Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at feaffc00 (32-bit, non-prefetchable) [size=512] jarada stefan # lspci -v -n -s 02:06.0 02:06.0 0480: 1131:7146 (rev 01) Subsystem: 13c2:1019 Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at feaffc00 (32-bit, non-prefetchable) [size=512] Tuning in general seems to be really slow. Somtimes it takes up to to one minute for szap2 to get a lock: zapping to 1 'Pro7HD': sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid = 0x00ff, apid = 0x0103 sid = 0x27d8 (fec = -2147483648, mod = 2) Querying info .. Delivery system=DVB-S2 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ----------------------------------> Using 'STB0899 DVB-S2' DVB-S2 diseqc: sat_no:0 pol_vert:0 hi_band:1 cmd:e0 10 38 f3 wait:0 do_tune: API version=2, delivery system = 2 do_tune: Frequency = 2122000, Srate = 22000000 (DVB-S2) do_tune: Frequency = 2122000, Srate = 22000000 (SET_PARAMS) status 1a | signal 05aa | snr 0026 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1a | signal 05aa | snr 0027 | ber 00145855 | unc fffffffe | FE_HAS_LOCK status 1a | signal 05aa | snr 0026 | ber 0065b9aa | unc fffffffe | FE_HAS_LOCK status 1a | signal 05aa | snr 0025 | ber 00145855 | unc fffffffe | FE_HAS_LOCK status 1a | signal 05aa | snr 0026 | ber 00000000 | unc fffffffe | FE_HAS_LOCK Status 0x1a seems a bit doubtfull: FE_HAS_SIGNAL and FE_HAS_VITERBI are not set. In DVB-S mode, I've problems to get a lock with some transpoders at all: ZDF works with vdr, ARD doesn't . -- Stefan Lucke _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
