Sebastian wrote: > Hello, > > i recently bought a Technotrend S-1401 DVB-S card. Somehow this card > wont work for me, because i dont get a frontend0 device. Other device > nodes like demux0 or dvr0 are there, but frontend0 is missing. I am > using Linux 2.6.20-16 (2.6.21 tested too) and the latest Mercurial DVB > drivers. I get the following kernel messages with debug=1 in tda10086.c > > [ 34.452456] saa7146: register extension 'budget dvb'. > [ 34.452508] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, > low) -> IRQ 22 > [ 34.452535] saa7146: found saa7146 @ mem f8982000 (revision 1, irq > 22) (0x13c2,0x1018). > [ 34.452541] saa7146 (0): dma buffer size 192512 > [ 34.452543] DVB: registering new adapter (TT-Budget-S-1401 PCI) > [ 34.490315] adapter has MAC addr = 00:d0:5c:09:11:8e > [ 34.552672] tda10086: tda10086_attach > [ 34.552754] tda10086: tda10086_read_byte: error reg=0x1e, ret=-121 > [ 34.552774] budget: A frontend driver was not found for device > 1131/7146 subsystem 13c2/1018 > > function tda10086_attach expects tda10086_read_byte to return 0xe1, but > it returns -121 instead. > > Since its very hard for me to understand this driver code, this is all i > could find out till now. Does anybody have a clue what the problem is or > how to fix it? Basically the driver should work. Are you sure that the card is ok, i.e. did you test the card with the windoes driver? Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.3.9: http://www.escape-edv.de/endriss/vdr/ ---------------------------------------------------------------- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
