On Monday 18 June 2007 08:51, Hartmut Hackmann wrote:
> Hi, Werner
>
> Werner Braun schrieb:
[snip]
> Summing up the test results, i have the impression that this card is
> different from what we have yet.
> I am almost sure that the problem lies in the GPIO configuration. Please
> try the following:
> Please keep forcing the card type to 94
> In the configuration structure (saa7134-dvb.c):
> static struct tda1004x_config ads_tech_duo_config = {
> change the entry
> .gpio_config = TDA10046_GP00_I,
> to
> .gpio_config = TDA10046_GP10,
> I expect that this makes DVB-T work but it might break analog TV.
> Please try also
> .gpio_config = TDA10046_GP10_I,
> This should make analog work again but it might carsh the channel decoder
> (bad firmware) if this is the case, please report this. It might be
> necessary to increase a delay in the channel decoder initialization
> procedure.
>
> Good luck
> Hartmut
That is interesting. Looking at saa7134-dvb.c in 2.6.21.5 and a
recent v4l-dvb patch, they are different. That could be why patching
2.6.21.5 stops it working for my MSI TV@nywhere A/D.
cat floppy/temp_kernel
static struct tda1004x_config ads_tech_duo_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X_GP00,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
cat floppy/temp_patch
static struct tda1004x_config ads_tech_duo_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP00_I,
.if_freq = TDA10046_FREQ_045,
.tuner_address = 0x61,
.request_firmware = philips_tda1004x_request_firmware
};
--
sig goes here...
Peter D.
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
