-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Attached. > I can test it up to the point where it correctly attaches the mt2060, > but then I don't know if it tunes correctly since my stick doesn't work > (though it should, since it does the same as before, only without the > extra "tuner" pointer). Olaf, could you give it a try? Works so far. > I also tried (again) to unload and reload the module and, while at first > it seems to recognize and initialize, after a (short) while it gives > bulk transfer errors, so in case the module is unloaded the stick must > be reconnected. The same for me. If I unload only af9005 everything works fine. These errors seem to happen only after unloading mt2060. Another observation: When I run tzap in one window and dvbsnoop in another, then stop the tzap, I have this: # lsmod | head Module Size Used by mt2060 6148 1 dvb_usb_af9005 26004 0 # fuser /dev/dvb/adapter0/* /dev/dvb/adapter0/demux0: 14596 I can even unload the af9005 module, but modprobe waits until I stop the tzap process. After stopping tzap I get # lsmod | head Module Size Used by mt2060 6148 1 dvb_usb_af9005 26004 4294967295 (not sure if this happens all the time though). (Btw. once tuned, the actual hardware seems to not care about the tuner module at all, I can stop tzap, lose lock due to disconnected antenna, etc. and the demuxer doesn't stop streaming. Is this intentional, hardware limitation, or what?) Olaf -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGcm45GPw4gdAdiZ0RAtXdAJ0VD8J7aOVkahoJBnvZiuUHWi43wgCffRP/ XkhzOVxpCdggC1b954UJwt4= =aysv -----END PGP SIGNATURE----- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
