>> [root@media1 ~]# kaffeine >> kbuildsycoca running... >> 0 >> /dev/dvb/adapter0/frontend0 : opened ( ST STV0297 DVB-C ) >> /dev/dvb/adapter0/frontend1 : : No such file or directory >> /dev/dvb/adapter1/frontend0 : : No such file or directory >> QLayout "unnamed" added to QWidget "unnamed", which already has a layout >> [root@media1 ~]# Tuning to: Scan / autocount: 0 >> DvbCam::probe(): LLCI slot found on /dev/dvb/adapter0/ca0 >> DvbCam::probe(): CA module present on /dev/dvb/adapter0/ca0 >> Using DVB device 0:0 "ST STV0297 DVB-C" >> tuning DVB-C to 594000000 >> inv:2 sr:6956000 fecH:9 mod:3 >> . LOCKED. >> NOUT: 1 >> dvbEvents 0:0 started >> Tuning delay: 705 ms >> CamThread: started >> CamThread: just using the first cam slot >> PmtThread: started >> [2550] [input_vdr] vdr_class_get_instance: /usr/share/apps/kaffeine/logo >> bad_frame >> [2550] [input_vdr] vdr_class_get_instance: /root/.kaxtv.ts >> pipe opened >> PmtThread: new pmt received >> PmtThread: stopped >> xine pipe opened /root/.kaxtv.ts >> CamThread: cam 0 is ready >> CamThread: LLCI cam slot detected >> CamThread: pmt sent to cam > This looks correct (pmt has been found, encoded & uploaded to the cam). Are > you sure your cam works correctly with the used scrambling system / smart > card? The CAM/Smartcard work fine with the BDA drivers provided, under Windows... _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
