>Le mercredi 06 juin 2007 05:28, Simon Baxter a écrit : >> I'm trying to get a picture out of my budget TT-C1500 card/ci/cam and >> having little success (but am making progress!). My cable provider >> encrypts everything - so it has to run through the CAM. >> >> the dvb-apps 'dvbstream' gives me the following: > Since dvbstream does not manage cams, you can't expect to get a decrypted > stream with it :) > In order to get a decrypted stream, the cam has to be informed which service > to decrypt. This is done by apps with cicam support. > Give kaffeine a try, it handles that automatically (jut make sure your > channels are marked "crypted", sometimes the fta flag is not set correctly in > SI tables). I've tried Kaffeine - and still get no picture. Here's the kaffeine log: [root@media1 ~]# kaffeine kbuildsycoca running... 0 /dev/dvb/adapter0/frontend0 : opened ( ST STV0297 DVB-C ) /dev/dvb/adapter0/frontend1 : : No such file or directory /dev/dvb/adapter1/frontend0 : : No such file or directory QLayout "unnamed" added to QWidget "unnamed", which already has a layout [root@media1 ~]# Tuning to: Scan / autocount: 0 DvbCam::probe(): LLCI slot found on /dev/dvb/adapter0/ca0 DvbCam::probe(): CA module present on /dev/dvb/adapter0/ca0 Using DVB device 0:0 "ST STV0297 DVB-C" tuning DVB-C to 594000000 inv:2 sr:6956000 fecH:9 mod:3 . LOCKED. NOUT: 1 dvbEvents 0:0 started Tuning delay: 705 ms CamThread: started CamThread: just using the first cam slot PmtThread: started [2550] [input_vdr] vdr_class_get_instance: /usr/share/apps/kaffeine/logo bad_frame [2550] [input_vdr] vdr_class_get_instance: /root/.kaxtv.ts pipe opened PmtThread: new pmt received PmtThread: stopped xine pipe opened /root/.kaxtv.ts CamThread: cam 0 is ready CamThread: LLCI cam slot detected CamThread: pmt sent to cam <channel-change> Asked to stop pipe closed Live stopped CamThread: stopping requested CamThread: stopped dvbstream::run() end dvbEvents 0:0 ended fdDvr closed Frontend closed Tuning to: TV2 / autocount: 1 Using DVB device 0:0 "ST STV0297 DVB-C" tuning DVB-C to 618000000 inv:2 sr:6956000 fecH:9 mod:3 . LOCKED. NOUT: 1 dvbEvents 0:0 started Tuning delay: 492 ms [2550] [input_vdr] vdr_class_get_instance: /root/.kaxtv1.ts xine pipe opened /root/.kaxtv1.ts pipe opened CamThread: started CamThread: just using the first cam slot PmtThread: started PmtThread: new pmt received PmtThread: stopped CamThread: cam 0 is ready CamThread: LLCI cam slot detected CamThread: pmt sent to cam <channel-change> Asked to stop pipe closed Live stopped CamThread: stopping requested CamThread: stopped dvbstream::run() end dvbEvents 0:0 ended fdDvr closed Frontend closed Tuning to: Rialto / autocount: 2 Using DVB device 0:0 "ST STV0297 DVB-C" tuning DVB-C to 570000000 inv:2 sr:6956000 fecH:9 mod:3 . LOCKED. NOUT: 1 dvbEvents 0:0 started Tuning delay: 482 ms CamThread: started CamThread: just using the first cam slot PmtThread: started [2550] [input_vdr] vdr_class_get_instance: /root/.kaxtv.ts xine pipe opened /root/.kaxtv.ts pipe opened PmtThread: new pmt received PmtThread: stopped CamThread: cam 0 is ready CamThread: LLCI cam slot detected en50221_tl_handle_sb: Received T_SB for connection not in T_STATE_ACTIVE from module on slot 00 CamThread: [warning] polling the stack failed CamThread: pmt sent to cam Any ideas? _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
