# modprobe cx88-dvb
FATAL: Error inserting cx88_dvb
(/lib/modules/2.6.22-rc3-smp/kernel/drivers/media/video/cx88/cx88-dvb.ko):
No such device
dmesg spits this out after trying "modprobe cx88-dvb"
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
# l /dev/vbi*
lrwxrwxrwx 1 root root 4 2007-05-30 06:24 /dev/vbi -> vbi0
crw-rw---- 1 root video 81, 224 2007-05-30 06:24 /dev/vbi0
crw-rw---- 1 root video 81, 225 2007-05-30 06:24 /dev/vbi1
/dev/dvb is not created.
From dmesg
============
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx2388x v4l2 driver version 0.0.6 loaded
x2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 18
CORE cx88[0]: subsystem: 17de:08a4, board: KWorld/VStream XPert DVB-T
[card=14,insmod option]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]: Test OK
input: cx88 IR (KWorld/VStream XPert D as /class/input/input5
cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 18, latency: 32, mmio:
0xfb000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt 0000:01:08.2[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 18
cx88[0]/0: found at 0000:01:08.2, rev: 5, irq: 18, latency: 32, mmio:
0xfa000000
cx88[0]/0: registered device video2 [v4l2]
cx88[0]/0: registered device vbi1
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
# lsmod|grep cx8
cx8800 54508 0
cx8802 36868 0
cx88xx 88228 2 cx8800,cx8802
ir_common 54020 1 cx88xx
i2c_algo_bit 23428 1 cx88xx
tveeprom 34832 1 cx88xx
videodev 45056 3 gspca,cx8800,cx88xx
compat_ioctl32 25600 1 cx8800
v4l2_common 36736 4 cx8800,cx88xx,videodev,compat_ioctl32
video_buf 43524 4 cx8800,cx8802,cx88xx,video_buf_dvb
btcx_risc 21896 3 cx8800,cx8802,cx88xx
i2c_core 44032 12
it87,i2c_isa,or51132,mt352,cx22702,cx22700,nvidia,cx88xx,i2c_algo_bit,tveeprom,dvb_pll,i2c_nforce2
I moved this card from a x86 box to this 64x2 AM2 box and the following
files have the same contents. udev the same as on the x86 box. This is
definitely a KWorld/VStream XPert DVB-T card which I had working for
over one year at least. Kernel is 2.6.22-rc3, same problem with
2.6.22-rc2-git7. I haven't checked it in a few weeks on the x86 box, but
it was OK on earlier 2.6.22-rc kernels.
# less /etc/sysconfig/hardware/hwcfg-bus-pci-0000\:01\:08.0
# YaST configured TV card
# 75Hn.ANrE4vYza54:CX23880/1/2/3 PCI Video and Audio Decoder
MODULE='cx88-dvb'
STARTMODE='auto'
# less /etc/modprobe.d/tv
alias char-major-81 videodev
options i2c-algo-bit bit_test=1
# YaST configured TV card
# 75Hn.ANrE4vYza54:CX23880/1/2/3 PCI Video and Audio Decoder
alias char-major-81-0 cx8800
alias char-major-81-1 off
alias char-major-81-2 off
alias char-major-81-3 off
I added this to modprobe.conf.local to get the card recognised.
# less /etc/modprobe.conf.local
#
# please add local extensions to this file
#
options cx88xx card=14
from lspci -vvv
===============
01:08.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: KWorld Computer Co. Ltd. Unknown device 08a4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 0
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:08.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder (rev 05)
Subsystem: KWorld Computer Co. Ltd. Unknown device 08a4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (1000ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 0
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Any ideas?
Thanks and Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
