In my System there are two DVB Cards. One is DVB-C and is working, the other is DVB-S2 an is not recognized. lspci -v 02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: KNC One Unknown device 0021 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f7efbc00 (32-bit, non-prefetchable) [size=512] 02:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: KNC One Unknown device 0019 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at f7efb800 (32-bit, non-prefetchable) [size=512] dmesg DVB: registering new adapter (KNC1 DVB-C Plus). DVB: registering frontend 0 (Philips TDA10021 DVB-C)... dvb_ca adapter 0: DVB CAM detected and initialised successfully dvb_ca adapter 0: DVB CAM detected and initialised successfully Why is the S2 Adapter with the same Chipset, and different Tuner not detected? PCI-Controller SAA7146, DVB-S/DVB-S2 -Channel-Demodulator STB0899 von ST Microelectronics, Can-Tuner mit integriertem Vorverstärker SD1878 von Philips, Any Ideas? Best Regards ChriZ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
