Nico Sabbi wrote:
Zoilo Gomez wrote:
The Diseqc-specs at
http://www.eutelsat.com/satellites/pdf/Diseqc/Reference%20docs/bus_spec.pdf
(table on page 13) confirm that dvbtune is in fact sending the wrong
command.
With a patched dvbtune (pol-bit and band-bit both inverted) it works
OK, and is also according to the Eutelsat specs.
I have attached a patch for you.
The problem is only in dvbtune (version 0.5); you may not have been
using dvbtune (dvbtools); dvbscan and szap (linuxtv-dvb-apps) do not
suffer from this problem.
Z.
------------------------------------------------------------------------
diff -Naur dvbtune-0.5.orig/tune.c dvbtune-0.5/tune.c
--- dvbtune-0.5.orig/tune.c 2004-02-06 15:00:36.000000000 +0100
+++ dvbtune-0.5/tune.c 2007-04-30 21:22:53.000000000 +0200
@@ -203,7 +203,7 @@
* bits are: option, position, polarizaion, band
*/
cmd.cmd.msg[3] =
- 0xf0 | (((sat_no * 4) & 0x0f) | (hi_lo ? 1 : 0) | (pol ? 0 : 2));
+ 0xf0 | (((sat_no * 4) & 0x0f) | (hi_lo ? 0 : 1) | (pol ? 2 : 0));
diseqc_send_msg(secfd, pol,
&cmd, hi_lo,
I disagree with your changes:
according to the specs that you linked the fields are:
*switch-number
*switch option
*satellite position
*polarization
*frequency_is_in_hi_band
*bytecode
1 A A V Lo F0
2 A A V Hi F1
3 A A H Lo F2
4 A A H Hi F3
5 A B V Lo F4
6 A B V Hi F5
7 A B H Lo F6
8 A B H Hi F7
9 B A V Lo F8
10 B A V Hi F9
11 B A H Lo FA
12 B A H Hi FB
13 B B V Lo FC
14 B B V Hi FD
15 B B H Lo FE
16 B B H Hi FF
assuming that in the code "pol" stands for "pol_is_vertical" and that
"hi_lo" stands for "hi_band" ( frequency above SLOF) and counting bits
from 8..1
- the last bit must be set to 1 when hi_band is 1
- the forelast bit (0x2) must be set when the polarization is
horizontal (this polv is 0).
Please, explain why you believe that the current code is incorrect
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
