ves1x93_attach() called allthough frontend ves1x93 isn't needed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello list,

in my kernel configuration (kernel 2.6.21.1) I have set 
CONFIG_DVB_CORE_ATTACH=y. The DVB card I'm setting up is a TT FF rev. 
1.5 that uses the stv0299 frontend module. This is the only frontend 
module I compiled.

Everytime I load dvb_ttpci ves1x93_attach() is called allthough ves1x93 
is missing (see attached dmesg.out).

I take it this isn't serious at all, but if someone could find the time 
to clean it up I would appreciate it.

Thanks for all your work!

Regards
Sebastian
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 21
saa7146: found saa7146 @ mem f881a000 (revision 1, irq 21) (0x13c2,0x0000).
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
adapter has MAC addr = 00:d0:5c:03:2a:84
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: Unable to find symbol ves1x93_attach()
DVB: registering frontend 0 (ST STV0299 DVB-S)...
dvb-ttpci: found av7110-0.
01:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
	Subsystem: Technotrend Systemtechnik GmbH Siemens/Technotrend/Hauppauge DVB card rev1.3 or rev1.5
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (3750ns min, 9500ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=512]
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_FE_CUSTOMISE=y
CONFIG_DVB_STV0299=m
CONFIG_DVB_PLL=m
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux