Hi folks,
I'm having problems with getting my Hauppauge Nova-T-500 dual DVB-T
tuner running. If it is relevant, it is the half-height OEM version,
rather than the retail version.
The box is a Dell Dimension 5000, initially running Ubuntu 6.10. Because
the card needs a kernel >= 2.6.19 I upgraded to Ubuntu 7.04 with the
2.6.20 kernel. I've followed what look like two reasonably detailed
guides to getting this card working
http://www.omskakas.se/2007/01/howto-hauppauge-nova-t-500-pci-under-linux.html
and
http://wiki.efficientpc.co.uk/index.php/Install_Nova-T_500_On_Ubuntu_Linux
I've worked through both, carefully following all of the steps.
When I load the dvb-usb-dib0700 module, I get;
mythtv@brianclough:~$ sudo modprobe -v dvb-usb-dib0700
insmod
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/dib7000p.ko
insmod
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/dib7000m.ko
insmod
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.ko
force_lna_activation=1
which looks as expected, but I find the following in dmesg;
[ 129.916740] dib0700: loaded with support for 2 different device-types
[ 130.003164] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm
state.
[ 130.003236] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 130.003624] DVB: registering new adapter (Hauppauge Nova-T 500 Dual
DVB-T).
[ 130.090824] dvb-usb: no frontend was attached by 'Hauppauge Nova-T 500
Dual DVB-T'
[ 130.090834] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 130.091231] DVB: registering new adapter (Hauppauge Nova-T 500 Dual
DVB-T).
[ 130.091941] dvb-usb: no frontend was attached by 'Hauppauge Nova-T 500
Dual DVB-T'
[ 130.091951] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully
initialized and connected.
[ 130.092319] usbcore: registered new interface driver dvb_usb_dib0700
I think the relevant is the "no frontend was attached". When I run
mythtv-setup, I can only find the other tuner (a USB twinhan).
The twinhan usb DVB-T box is successfully working. If I look in
/dev/dvb/adapter2 I find demux0, dvr0, frontend0 and net0. If I look in
/dev/dvb/adapter0 or /dev/dvb/adapter1 I only see demux0, dvr0 and net0.
If it is relevant the output of lsusb and "lsmod | grep dvb" is attached.
So what am I doing wrong? Any tips, advice or links that would help me
diagnose or solve the problem will be gratefully received.
Regards,
--
____________
Dave MacLeod
dvb_usb_dib0700 14856 0
dib7000m 16004 1 dvb_usb_dib0700
dib7000p 14340 1 dvb_usb_dib0700
dvb_usb_dibusb_mb 13312 0
dvb_usb_dibusb_common 11012 1 dvb_usb_dibusb_mb
dvb_usb 24972 3 dvb_usb_dib0700,dvb_usb_dibusb_mb,dvb_usb_dibusb_common
dvb_core 81832 1 dvb_usb
dvb_pll 14980 3 dvb_usb_dibusb_mb,dvb_usb_dibusb_common,dvb_usb
dib3000mc 13444 2 dvb_usb_dib0700,dvb_usb_dibusb_common
dib3000mb 14848 1 dvb_usb_dibusb_mb
i2c_core 22784 9 dib7000m,dib7000p,i2c_ec,dvb_usb_dibusb_mb,dvb_usb,dvb_pll,dib3000mc,dibx000_common,dib3000mb
usbcore 134280 8 dvb_usb_dib0700,ndiswrapper,dvb_usb_dibusb_mb,dvb_usb,usbhid,ehci_hcd,uhci_hcd
Bus 008 Device 002: ID 2040:9941 Hauppauge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2040 Hauppauge
idProduct 0x9941
bcdDevice 1.00
iManufacturer 1 Hauppauge
iProduct 2 WinTV Nova-DT
iSerial 3 4027314684
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
