Petri Helin wrote: > Kari Salmela wrote: >> Hello >> >> >> >> Hardware: Technotrend DVB-C 1500, CI, Conax CAM, Asus P5B >> >> >> >> Am I the only one left alone without working system with current >> development v4l tree? Somewhere between 2.6.18.1 and 2.6.20 (and >> current mercurial, also) something changed, and tuning to Discovery >> channel no longer works at least for me. With 2.6.18.1 plain vanilla >> kernel, Discovery channel on 138 Mhz works fine: >> > > Well, after going through the changes that might have had effect on > tuning, I found out the one which had caused this problem. I do not know > the actual reason behind the change, but the changelog says that it > was meant to "Fix TD1316 tuner for DVBC". But at least in my case it > seams to have broken the tuner instead. > Attached is a patch to revert the change. >> >> >> All the other multiplexes work ok with both setups, except for one HD >> channel with QAM256, which has some artifacts, but that’s a different >> issue… > > Although it is a different issue, I would really like to know if someone > had any suggestions how to even try to fix it... Your problem is a result of this change: http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=e7c424bbf9aa;style=gitweb. It was started by this mail: http://www.linuxtv.org/pipermail/linux-dvb/2006-November/014461.html. This mail is a little bit suspect, because dvbc_philips_tdm1316l_tuner_set_params() in budget-ci.c has nothing to do with the Technotrend Connect C-1200 USB DVB-C adapter. Please revert this dubious change. - Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
