ras243-dvb@xxxxxxxxx wrote: > Hi all, > > A brief update. Firstly I've confirmed my newly created firmware file (pulled > from usbsnoop logs) being sent to the xc3028 is identical to windows. > Secondly, apart from a gate register being written, the ZL10353 should be > consistent as well. Thirdly when I force the tuning data being sent to the > XC3028 I'm still not getting a lock for the same numbers which worked under > windows. :( > > Points of note are that the initialisation sequence is different to windows but > when I started tweaking GPIO pins to be similar I hung the USB bus. Secondly > on the windows logs just before the data stream begins the zl10353 demodulator > is disabled (0x0c -> &0x50) and it starts chatting to i2c addresses 6f and 6b > but I don't know what chips or interfaces they are. You can ignore the access to 0x6f and 0x6b -- those are the RTC chips, and they're not needed for normal functionality. This, however, isn't clear to me: "zl10353 demodulator is disabled (0x0c -> &0x50)" ... can you show a usbsnoop log snippet of this behavior? > I'm going to have to sleep on it. > > Roger. Cheers, Mike _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
