Andreas Marksteiner wrote: > Hello, > > I recently bougth 3 pieces of TT S2-3200 and want to get them running too. > > After some hours searching the web and almost every time ending up here > I would like to help get the STB0899 driver working with the TechnoTrend > S2-3200. > > I have compiled some Kernels - some lower 2.6.x Kernel has to be used to > work with the driver code from Manus branch - and played arround with > the driver a little. Following some hints in the web, that it should be > possible to at least get some life into the driver [1], what in my > understanding for now should be impossible because of the missing > implementation of the correct PCI ID for the TT S2-3200, the Driver > shouldn't care about the card at all. > > As you wrote trying to add the PCI ID could be a first approach. I tried > so, but had no time so far to test/finish. My next step will be to get > this done. > > I assume, that it should be possible to get the driver working. The > support for the chipset itself with all register writing "magic" was > already implemented by Manu - so i think only small adaptions of the > code will be needed (although perhaps this is completely wrong - only an > complete assumtion of mine, for no reason). > > Perhaps we could get some short comment, about what would have be done > next and some hint where to start would be great. I have not overlooked > the code so far. Some people are sponsoring for the STB0899 support to happen for most cards. Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
