mkrufky@xxxxxxxxxxx schrieb:
Was this patch ever posted to the linux-dvb mailing list? There are some (minor) concerns that I have with this changeset. Please see my comments inline below: Patch from Marco Gittler wrote:The patch number 5532 was added via Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx> to http://linuxtv.org/hg/v4l-dvb master development tree. Kernel patches at this development tree might be modified to keep backward compatibility with older kernels. Those compatibility stuff will be removed during preparation to be included at kernel mainstream. If anyone has any objections, please let us know by sending a message to: v4l-dvb-maintainer@xxxxxxxxxxx ------ From: Marco Gittler <g.marco@xxxxxxxxxx> Add support for Opera S1- DVB-USB This patch adds support for DVB-Opera S1 USB 2.0 BOX. Signed-off-by: Marco Gittler <g.marco@xxxxxxxxxx> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx> ---linux/drivers/media/dvb/dvb-usb/Kconfig | 7 linux/drivers/media/dvb/dvb-usb/Makefile | 4 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 3 linux/drivers/media/dvb/dvb-usb/opera1.c | 577 ++++++++++++++++++ linux/drivers/media/dvb/dvb-usb/opera1.h | 9 linux/drivers/media/dvb/frontends/dvb-pll.c | 25 linux/drivers/media/dvb/frontends/dvb-pll.h | 1 7 files changed, 626 insertions(+)diff -r 294b550d74f4 -r c3c05879dab5 linux/drivers/media/dvb/dvb-usb/Kconfig --- a/linux/drivers/media/dvb/dvb-usb/Kconfig Thu Apr 19 11:21:50 2007 -0300 +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig Thu Apr 19 11:26:47 2007 -0300 @@ -211,3 +211,10 @@ config DVB_USB_DTT200U The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan).The WT-220U and its clones are pen-sized.+ +config DVB_USB_OPERA1 + tristate "Opera1 DVB-S USB2.0 receiver" + depends on DVB_USB + select DVB_STV0299 if !DVB_FE_CUSTOMISE + help + Say Y here to support the Opera DVB-S USB2.0 receiver. diff -r 294b550d74f4 -r c3c05879dab5 linux/drivers/media/dvb/dvb-usb/Makefile --- a/linux/drivers/media/dvb/dvb-usb/Makefile Thu Apr 19 11:21:50 2007 -0300 +++ b/linux/drivers/media/dvb/dvb-usb/Makefile Thu Apr 19 11:26:47 2007 -0300 @@ -51,4 +51,8 @@ dvb-usb-dib0700-objs = dib0700_core.o di dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o+dvb-usb-opera-objs = opera1.o+obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o + + EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff -r 294b550d74f4 -r c3c05879dab5 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Thu Apr 19 11:21:50 2007 -0300 +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Thu Apr 19 11:26:47 2007 -0300 @@ -38,6 +38,7 @@ #define USB_VID_ULTIMA_ELECTRONIC 0x05d8 #define USB_VID_UNIWILL 0x1584 #define USB_VID_WIDEVIEW 0x14aa +#define USB_VID_OPERA1 0x695cVIDs should be added in alphabetical order.
done in the patch
this seem very difficult. the device uses 16 bit (or better 2 byte for addressing something) the big problem ist that f.e. 0xb880 must READ data (remote-code) and another example voltage switch: the adress changes from 0xb600 to 0xb601. (both write to device)/* Product IDs */#define USB_PID_ADSTECH_USB2_COLD 0xa333 @@ -142,6 +143,8 @@ #define USB_PID_GENPIX_8PSK_WARM 0x0201 #define USB_PID_SIGMATEK_DVB_110 0x6610 #define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513 +#define USB_PID_OPERA1_COLD 0x2830 +#define USB_PID_OPERA1_WARM 0x3829#endifdiff -r 294b550d74f4 -r c3c05879dab5 linux/drivers/media/dvb/frontends/dvb-pll.c --- a/linux/drivers/media/dvb/frontends/dvb-pll.c Thu Apr 19 11:21:50 2007 -0300 +++ b/linux/drivers/media/dvb/frontends/dvb-pll.c Thu Apr 19 11:26:47 2007 -0300 @@ -451,6 +451,31 @@ struct dvb_pll_desc dvb_pll_thomson_fe66 } }; EXPORT_SYMBOL(dvb_pll_thomson_fe6600); +static void opera1_bw(u8 *buf, u32 freq, int bandwidth) +{ + if (bandwidth == BANDWIDTH_8_MHZ) + buf[2] |= 0x08; +} + +struct dvb_pll_desc dvb_pll_opera1 = { + .name = "Opera Tuner", + .min = 900000, + .max = 2250000, + .iffreq= 0, + .setbw = opera1_bw, + .count = 8, + .entries = { + { 1064000, 500, 0xe5, 0xc6 }, + { 1169000, 500, 0xe5, 0xe6 }, + { 1299000, 500, 0xe5, 0x24 }, + { 1444000, 500, 0xe5, 0x44 }, + { 1606000, 500, 0xe5, 0x64 }, + { 1777000, 500, 0xe5, 0x84 }, + { 1941000, 500, 0xe5, 0xa4 }, + { 2250000, 500, 0xe5, 0xc4 }, + } +}; +EXPORT_SYMBOL(dvb_pll_opera1);struct dvb_pll_priv {/* i2c details */ diff -r 294b550d74f4 -r c3c05879dab5 linux/drivers/media/dvb/frontends/dvb-pll.h --- a/linux/drivers/media/dvb/frontends/dvb-pll.h Thu Apr 19 11:21:50 2007 -0300 +++ b/linux/drivers/media/dvb/frontends/dvb-pll.h Thu Apr 19 11:26:47 2007 -0300 @@ -48,6 +48,7 @@ extern struct dvb_pll_desc dvb_pll_phili extern struct dvb_pll_desc dvb_pll_philips_td1316;extern struct dvb_pll_desc dvb_pll_thomson_fe6600;+extern struct dvb_pll_desc dvb_pll_opera1;extern int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,u32 freq, int bandwidth); diff -r 294b550d74f4 -r c3c05879dab5 linux/drivers/media/dvb/dvb-usb/opera1.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/linux/drivers/media/dvb/dvb-usb/opera1.c Thu Apr 19 11:26:47 2007 -0300 @@ -0,0 +1,577 @@ +/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card +* +* Copyright (C) 2006 Mario Hlawitschka (dh1pa@xxxxxxxxx) +* Copyright (C) 2006 Marco Gittler (g.marco@xxxxxxxxxx) +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the Free +* Software Foundation, version 2. +* +* see Documentation/dvb/README.dvb-usb for more information +*/ + +#include "opera1.h" +#include "stv0299.h" + +#define OPERA_READ_MSG 0 +#define OPERA_WRITE_MSG 1 +#define OPERA_I2C_TUNER 0xd1 + +#define READ_FX2_REG_REQ 0xba +#define READ_MAC_ADDR 0x08 +#define OPERA_WRITE_FX2 0xbb +#define OPERA_TUNER_REQ 0xb1 +#define REG_1F_SYMBOLRATE_BYTE0 0x1f +#define REG_20_SYMBOLRATE_BYTE1 0x20 +#define REG_21_SYMBOLRATE_BYTE2 0x21 + +struct opera1_state { + u32 last_key_pressed; +}; +struct opera_rc_keys { + u32 keycode; + u32 event; +}; + +int dvb_usb_opera1_debug; +module_param_named(debug, dvb_usb_opera1_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." + DVB_USB_DEBUG_STATUS); +#if 0 +struct mutex mymutex; +#endif + +static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value, + u8 * data, u16 len, int flags) +{ + int ret; + u8 r; + u8 u8buf[len];+ + unsigned int pipe = (flags == OPERA_READ_MSG) ? + usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);+ u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; + +#if 0 + if (mutex_lock_interruptible(&mymutex)) { + return -EAGAIN; + } +#endif + if (flags == OPERA_WRITE_MSG) + memcpy(u8buf, data, len); + ret = + usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, + value, 0x0, u8buf, len, 2000); + + if (request == OPERA_TUNER_REQ) { + if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR, + 0x01, 0x0, &r, 1, 2000)<1 || r!=0x08) + return 0; + } + if (flags == OPERA_READ_MSG) + memcpy(data, u8buf, len); +#if 0 + mutex_unlock(&mymutex); +#endif + return ret; +} + +/* I2C */ +Looks like i2c is using the 8-bit addresses instead of 7-bit addresses, just like how m920x, gl861 and au6610 did at first... This needs to be fixed.
so is not using standard i2c addresses and must be complete other handled.i mean a wrapper for the address stuff must be ni to make if full i2c comaptible.
the device is not the best i every saw ;), so the design is also not so nice.
any help how the convert from the addr to i2c addr can be done is welcome.
+static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr, + u8 * buf, u16 len, int flag) +{ + int ret = 0; + u8 request; + u16 value; + + if (!dev) { + info("no usb_device"); + return -EINVAL; + } + if (mutex_lock_interruptible(&dev->usb_mutex) < 0) + return -EAGAIN; + + request = (addr & 0xff00) >> 8; + if (!request) + request = 0xb1; + value = (addr & 0xff); + if (flag & OPERA_READ_MSG) { + value |= 0x01; + } + if (request == 0xa0) + value = 0xe600; + ret = opera1_xilinx_rw(dev->udev, request, value, buf, len, flag); + + mutex_unlock(&dev->usb_mutex); + return ret; +} + +static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i = 0, tmp = 0;+ + if (!d)+ return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if ((tmp = opera1_usb_i2c_msgxfer(d, + msg[i].addr, + msg[i].buf, + msg[i].len, + (msg[i].flags == + I2C_M_RD ? + OPERA_READ_MSG : + OPERA_WRITE_MSG))!= msg[i].len)) { + break; + } + if (dvb_usb_opera1_debug & 0x10) + info("sending i2c mesage %d %d", tmp, msg[i].len); + } + mutex_unlock(&d->i2c_mutex); + return num; +} + +static u32 opera1_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm opera1_i2c_algo = { + .master_xfer = opera1_i2c_xfer, + .functionality = opera1_i2c_func, +}; + +static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + static u8 command_13v[1]={0x00}; + static u8 command_18v[1]={0x01}; + struct i2c_msg msg[] = { + {.addr = 0xb600,.flags = 0,.buf = command_13v,.len = 1}, + }; + struct dvb_usb_adapter *udev_adap = + (struct dvb_usb_adapter *)(fe->dvb->priv); + if (voltage == SEC_VOLTAGE_18) { + msg[0].addr = 0xb601; + msg[0].buf = command_18v; + } + i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1); + return 0; +} + +static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, + u32 ratio) +{ + stv0299_writereg(fe, 0x13, 0x98); + stv0299_writereg(fe, 0x14, 0x95); + stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff); + stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff); + stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0); + return 0; + +} +static u8 opera1_inittab[] = { + 0x00, 0xa1, + 0x01, 0x15, + 0x02, 0x00, + 0x03, 0x00, + 0x04, 0x7d, + 0x05, 0x05, + 0x06, 0x02, + 0x07, 0x00, + 0x0b, 0x00, + 0x0c, 0x01, + 0x0d, 0x81, + 0x0e, 0x44, + 0x0f, 0x19, + 0x10, 0x3f, + 0x11, 0x84, + 0x12, 0xda, + 0x13, 0x98, + 0x14, 0x95, + 0x15, 0xc9, + 0x16, 0xeb, + 0x17, 0x00, + 0x18, 0x19, + 0x19, 0x8b, + 0x1a, 0x00, + 0x1b, 0x82, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + REG_1F_SYMBOLRATE_BYTE0, 0x06, + REG_20_SYMBOLRATE_BYTE1, 0x50, + REG_21_SYMBOLRATE_BYTE2, 0x10, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x37, + 0x25, 0xbc, + 0x26, 0x00, + 0x27, 0x00, + 0x28, 0x00, + 0x29, 0x1e, + 0x2a, 0x14, + 0x2b, 0x1f, + 0x2c, 0x09, + 0x2d, 0x0a, + 0x2e, 0x00, + 0x2f, 0x00, + 0x30, 0x00, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x13, + 0xff, 0xff, +}; + +static struct stv0299_config opera1_stv0299_config = { + .demod_address = 0xd0, + .min_delay_ms = 100, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0229_LOCKOUTPUT_0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .inittab = opera1_inittab, + .set_symbol_rate = opera1_stv0299_set_symbol_rate, +}; + +static int opera1_frontend_attach(struct dvb_usb_adapter *d) +{ + if ((d->fe = + dvb_attach(stv0299_attach, &opera1_stv0299_config, + &d->dev->i2c_adap)) != NULL) { + d->fe->ops.set_voltage = opera1_set_voltage; + return 0; + } + info("not attached stv0299"); + return -EIO; +} + +static int opera1_tuner_attach(struct dvb_usb_adapter *adap) +{ + adap->pll_addr = 0xc0; + adap->pll_desc = &dvb_pll_opera1; + adap->fe->ops.tuner_ops.set_params = dvb_usb_tuner_set_params_i2c;We should be using "dvb_attach(dvb_pll_attach, adap->fe, 0x60, &adap->dev->i2c_adap, &dvb_pll_opera1)" here, instead. also, please note the usage of 8-bit i2c addr instead of standard 7-bit.
done, except the i2c addr (reason is like above)
+ return 0; +} + +static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int addr = onoff ? 0xb701 : 0xb700; + u8 val = onoff ? 0x01 : 0x00; + if (dvb_usb_opera1_debug) + info("power %s", onoff ? "on" : "off"); + return opera1_usb_i2c_msgxfer(d, addr, &val, 1, OPERA_WRITE_MSG); +} + +static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + static u8 buf_start[2] = { 0xff, 0x03 }; + static u8 buf_stop[2] = { 0xff, 0x00 }; + struct i2c_msg start_tuner[] = { + {.addr = 0xb1a6,.buf = onoff ? buf_start : buf_stop,.len = 2}, + }; + if (dvb_usb_opera1_debug) + info("streaming %s", onoff ? "on" : "off"); + i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1); + return 0; +} + +static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + u8 b_pid[3]; + struct i2c_msg msg[] = { + {.addr = 0xb1a6,.buf = b_pid,.len = 3}, + }; + if (dvb_usb_opera1_debug) + info("pidfilter index: %d pid: %d %s", index, pid, + onoff ? "on" : "off"); + b_pid[0] = (2 * index) + 4; + b_pid[1] = onoff ? (pid & 0xff) : (0x00); + b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00); + i2c_transfer(&adap->dev->i2c_adap, msg, 1); + return 0; +} + +static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) +{ + int u = 0x04; + u8 b_pid[3]; + struct i2c_msg msg[] = { + {.addr = 0xb1a6,.buf = b_pid,.len = 3}, + }; + if (dvb_usb_opera1_debug) + info("%s hw-pidfilter", onoff ? "enable" : "disable"); + for (; u < 0x7e; u += 2) { + b_pid[0] = u; + b_pid[1] = 0; + b_pid[2] = 0x80; + i2c_transfer(&adap->dev->i2c_adap, msg, 1); + } + return 0; +} + +static struct dvb_usb_rc_key opera1_rc_keys[] = { + {0x5f, 0xa0, KEY_1}, + {0x51, 0xaf, KEY_2}, + {0x5d, 0xa2, KEY_3}, + {0x41, 0xbe, KEY_4}, + {0x0b, 0xf5, KEY_5}, + {0x43, 0xbd, KEY_6}, + {0x47, 0xb8, KEY_7}, + {0x49, 0xb6, KEY_8}, + {0x05, 0xfa, KEY_9}, + {0x45, 0xba, KEY_0}, + {0x09, 0xf6, KEY_UP}, /*chanup */ + {0x1b, 0xe5, KEY_DOWN}, /*chandown */ + {0x5d, 0xa3, KEY_LEFT}, /*voldown */ + {0x5f, 0xa1, KEY_RIGHT}, /*volup */ + {0x07, 0xf8, KEY_SPACE}, /*tab */ + {0x1f, 0xe1, KEY_ENTER}, /*play ok */ + {0x1b, 0xe4, KEY_Z}, /*zoom */ + {0x59, 0xa6, KEY_M}, /*mute */ + {0x5b, 0xa5, KEY_F}, /*tv/f */ + {0x19, 0xe7, KEY_R}, /*rec */ + {0x01, 0xfe, KEY_S}, /*Stop */ + {0x03, 0xfd, KEY_P}, /*pause */ + {0x03, 0xfc, KEY_W}, /*<- -> */ + {0x07, 0xf9, KEY_C}, /*capture */ + {0x47, 0xb9, KEY_Q}, /*exit */ + {0x43, 0xbc, KEY_O}, /*power */ + +}; + +static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state) +{ + struct opera1_state *opst = dev->priv; + u8 rcbuffer[32]; + const u16 startmarker1 = 0x10ed; + const u16 startmarker2 = 0x11ec; + struct i2c_msg read_remote[] = { + {.addr = 0xb880,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32}, + }; + int i = 0; + u32 send_key = 0; + + if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) { + for (i = 0; i < 32; i++) { + if (rcbuffer[i]) + send_key |= 1; + if (i < 31) + send_key = send_key << 1; + } + if (send_key & 0x8000) + send_key = (send_key << 1) | (send_key >> 15 & 0x01); + + if (send_key == 0xffff && opst->last_key_pressed != 0) { + *state = REMOTE_KEY_REPEAT; + *event = opst->last_key_pressed; + return 0; + } + for (; send_key != 0;) { + if (send_key >> 16 == startmarker2) { + break; + } else if (send_key >> 16 == startmarker1) { + send_key = + (send_key & 0xfffeffff) | (startmarker1 << 16); + break; + } else + send_key >>= 1; + } + + if (send_key == 0) + return 0; + + send_key = (send_key & 0xffff) | 0x0100; + + for (i = 0; i < ARRAY_SIZE(opera1_rc_keys); i++) { + if ((opera1_rc_keys[i].custom * 256 + + opera1_rc_keys[i].data) == (send_key & 0xffff)) { + *state = REMOTE_KEY_PRESSED; + *event = opera1_rc_keys[i].event; + opst->last_key_pressed = + opera1_rc_keys[i].event; + break; + } + opst->last_key_pressed = 0; + } + } else + *state = REMOTE_NO_KEY_PRESSED; + return 0; +} + +static struct usb_device_id opera1_table[] = { + {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)}, + {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, opera1_table); + +static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + u8 command[] = { READ_MAC_ADDR }; + opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG); + opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG); + return 0; +} +static int opera1_xilinx_load_firmware(struct usb_device *dev, + const char *filename) +{ + const struct firmware *fw = NULL; + u8 *b, *p; + int ret = 0, i; + u8 testval; + info("start downloading fpga firmware"); + + if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { + err("did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details on firmware-problems.", + filename); + return ret; + } else { + p = kmalloc(fw->size, GFP_KERNEL); + opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG); + if (p != NULL && testval != 0x67) { + + u8 reset = 0, fpga_command = 0; + memcpy(p, fw->data, fw->size); + /* clear fpga ? */ + opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1, + OPERA_WRITE_MSG); + for (i = 0; p[i] != 0 && i < fw->size;) { + b = (u8 *) p + i; + if (opera1_xilinx_rw + (dev, OPERA_WRITE_FX2, 0x0, b + 1, b[0], + OPERA_WRITE_MSG) != b[0] + ) { + err("error while transferring firmware"); + ret = -EINVAL; + break; + } + i = i + 1 + b[0]; + } + /* restart the CPU */ + if (ret || opera1_xilinx_rw + (dev, 0xa0, 0xe600, &reset, 1, + OPERA_WRITE_MSG) != 1) { + err("could not restart the USB controller CPU."); + ret = -EINVAL; + } + kfree(p); + } + } + if (fw) { + release_firmware(fw); + } + return ret; +} + +static struct dvb_usb_device_properties opera1_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + .firmware = "opera.fw",Please see the other firmware names... we should conform to the standard, and name it: "dvb-usb-opera-01.fw"
done firmware extract utility is coming soon
+ .size_of_priv = sizeof(struct opera1_state), + + .power_ctrl = opera1_power_ctrl, + .i2c_algo = &opera1_i2c_algo, + + .rc_key_map = opera1_rc_keys, + .rc_key_map_size = ARRAY_SIZE(opera1_rc_keys), + .rc_interval = 200, + .rc_query = opera1_rc_query, + .read_mac_address = opera1_read_mac_address, + .generic_bulk_ctrl_endpoint = 0x00, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .adapter = { + { + .frontend_attach = opera1_frontend_attach, + .streaming_ctrl = opera1_streaming_ctrl, + .tuner_attach = opera1_tuner_attach, + .caps = + DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter = opera1_pid_filter, + .pid_filter_ctrl = opera1_pid_filter_control, + .pid_filter_count = 252, + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } + }, + .num_device_descs = 1, + .devices = { + {"Opera1 DVB-S USB2.0", + {&opera1_table[0], NULL}, + {&opera1_table[1], NULL}, + }, + } +}; + +static int opera1_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_device *udev = interface_to_usbdev(intf); + + if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM && + udev->descriptor.idVendor == USB_VID_OPERA1 && + (d == NULL + || opera1_xilinx_load_firmware(udev, "opera1-fpga.fw") != 0)"dvb-usb-opera1-fpga.fw"+ ) { + return -EINVAL; + } + + if (dvb_usb_device_init(intf, &opera1_properties, THIS_MODULE, &d) != 0) + return -EINVAL; + return 0; +} + +static struct usb_driver opera1_driver = { + .name = "opera1", + .probe = opera1_probe, + .disconnect = dvb_usb_device_exit, + .id_table = opera1_table, +}; + +static int __init opera1_module_init(void) +{ + int result = 0; +#if 0 + mutex_init(&mymutex); +#endif + if ((result = usb_register(&opera1_driver))) { + err("usb_register failed. Error number %d", result); + } + return result; +} + +static void __exit opera1_module_exit(void) +{ + usb_deregister(&opera1_driver); +} + +module_init(opera1_module_init); +module_exit(opera1_module_exit); + +MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@xxxxxxxxx"); +MODULE_AUTHOR("Marco Gittler (c) g.marco@xxxxxxxxxx"); +MODULE_DESCRIPTION("Driver for Opera1 DVB-S device"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); diff -r 294b550d74f4 -r c3c05879dab5 linux/drivers/media/dvb/dvb-usb/opera1.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/linux/drivers/media/dvb/dvb-usb/opera1.h Thu Apr 19 11:26:47 2007 -0300 @@ -0,0 +1,9 @@ +#ifndef _OPERA1_H_ +#define _OPERA1_H_ + +#define DVB_USB_LOG_PREFIX "opera" +#include "dvb-usb.h" + +extern int dvb_usb_opera1_debug; +#define deb_xfer(args...) dprintk(dvb_usb_opera1_debug,0x02,args) +#endif _______________________________________________ video4linux-cvs mailing list video4linux-cvs@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/video4linux-cvs
diff -r c8b73ec18b42 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Thu Apr 19 12:04:50 2007 -0300
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Thu Apr 19 19:04:37 2007 +0200
@@ -32,13 +32,13 @@
#define USB_VID_LITEON 0x04ca
#define USB_VID_MEDION 0x1660
#define USB_VID_MSI 0x0db0
+#define USB_VID_OPERA1 0x695c
#define USB_VID_PINNACLE 0x2304
#define USB_VID_VISIONPLUS 0x13d3
#define USB_VID_TWINHAN 0x1822
#define USB_VID_ULTIMA_ELECTRONIC 0x05d8
#define USB_VID_UNIWILL 0x1584
#define USB_VID_WIDEVIEW 0x14aa
-#define USB_VID_OPERA1 0x695c
/* Product IDs */
#define USB_PID_ADSTECH_USB2_COLD 0xa333
diff -r c8b73ec18b42 linux/drivers/media/dvb/dvb-usb/opera1.c
--- a/linux/drivers/media/dvb/dvb-usb/opera1.c Thu Apr 19 12:04:50 2007 -0300
+++ b/linux/drivers/media/dvb/dvb-usb/opera1.c Thu Apr 19 19:53:36 2007 +0200
@@ -256,9 +256,8 @@ static int opera1_frontend_attach(struct
static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
{
- adap->pll_addr = 0xc0;
- adap->pll_desc = &dvb_pll_opera1;
- adap->fe->ops.tuner_ops.set_params = dvb_usb_tuner_set_params_i2c;
+ dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+ &adap->dev->i2c_adap, &dvb_pll_opera1);
return 0;
}
@@ -478,7 +477,7 @@ static struct dvb_usb_device_properties
static struct dvb_usb_device_properties opera1_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
- .firmware = "opera.fw",
+ .firmware = "dvb-usb-opera-01.fw",
.size_of_priv = sizeof(struct opera1_state),
.power_ctrl = opera1_power_ctrl,
@@ -533,7 +532,7 @@ static int opera1_probe(struct usb_inter
if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM &&
udev->descriptor.idVendor == USB_VID_OPERA1 &&
(d == NULL
- || opera1_xilinx_load_firmware(udev, "opera1-fpga.fw") != 0)
+ || opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga.fw") != 0)
) {
return -EINVAL;
}
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
