Re: Terratec Cinergy 1400 S-Video Input

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday 13 April 2007 15:09, Helmut Schaa wrote:
> I have a Terratec Cinergy 1400 card for watching DVB-T and it works very
> well but there is one feature missing (at least for me :-) ). The video
> input (I think its an S-Video input) does not work yet.
>
> I had a look at the code (cx88-cards.c) and noticed that some cards (e.g.
> Hauppauge Nova-S-Plus DVB-S) have composite and s-video inputs defined. So
> here's my question now: What do I have to do for getting the video input to
> work? And is somebody working on this?
>
> Regards,
> Helmut
>
Hi Helmut,
you can try the attached patch, I think it was posted on this list (or at 
least based on discussions from this list).

Regards
Uli
Index: linux-2.6.20/drivers/media/video/cx88/cx88-cards.c
===================================================================
--- linux-2.6.20.orig/drivers/media/video/cx88/cx88-cards.c
+++ linux-2.6.20/drivers/media/video/cx88/cx88-cards.c
@@ -764,6 +764,12 @@ struct cx88_board cx88_boards[] = {
 		.input          = {{
 			.type   = CX88_VMUX_DVB,
 			.vmux   = 0,
+		},{
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+		},{
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
 		}},
 		.mpeg           = CX88_MPEG_DVB,
 	},
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux