I've been with the DViCO dual digital saga for a while and was happily working around the frequency offset bug, but I decided to branch out and try Chris's new branch that fixes the problem. http://linuxtv.org/hg/~pascoe/v4l-dvb-test
I am running FC6 with kernel 2.6.20-1.2933.fc6, (x86_64) and I compiled and installed the hg tree without error.
However, when I did a "make load", I get the following error:
insmod: error inserting './cx88-blackbird.ko': -1 No such device
/sbin/insmod ./dst_ca.ko
Which doesn't seem to be a problem, becasue I can see and tune both of the dvb adaptors using tzap -a0 and tzap -a1, with the frequency offset problem fixed. We owe you a beer, Chris!
However, when I reboot, I am perplexed that I can only see one DVB adaptor. make reload certianly makes the other appear (and be tunable), but before then, it doens't want to know about the other adaptor.
I have included the contents of my dmesg at http://www.pastebin.ca/434477 Note that includes the boot (where one adaptor is missing) and after make reload, where both adaptors are usable.
And I most certainly have the firmware for the USB part in /lib/firmware.
Evidently, something is missing. I'd be great if someone could push me in the right direction.
Best regards
Damien Dusha.
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
