On Wednesday 11 April 2007 00:18:22 e9hack wrote: > Janne Grunau wrote: > > > > The patch is unfortunately not yet applied. This has different > > reasons. 1. We need your and for the TDA10023 part Georg Acher's > > sign-off message. > > Signed off by: Hartmut Birr <e9hack@xxxxxxxxxxxxxx> Thanks. > I can split the patch into four steps: > > 1.) Remove the polarity switching of the clock for the DVB-C cards in > budget-av.c. This hack is no longer necessary because the saa7146 can > do the job to remove the additional FEC bytes from the TS. > 2.) Add support for the frontend TDA10023. > 3.) Make the inversion setting configurable. The KNC ONE V1.0 uses > non inverted setting for the inversion. > 4.) Add the the new cards (Satelco Easywatch DVB-C with id 1894:002c, > KNC ONE DVB-C with id 1894:0022, KNC ONE PLUS DVB-C with id > 1894:0023, Terratec Cinergy 1200 DVB-C with id 153b:1176, KNC ONE > DVB-C V1.0) > > I'm not sure if this make sense. One card needs step 1 and 3. All > other cards need step 1 and 2. That would work. Better patch splitting would be 1. Remove the polarity switching of the clock for the DVB-C cards in budget-av.c. This hack is no longer necessary because the saa7146 can do the job to remove the additional FEC bytes from the TS.stays 2. Add support for the frontend TDA10023 and add cards that need the tda10023. 3. Make the inversion setting configurable. The KNC ONE V1.0 uses non inverted setting for the inversion and add the KNC ONE V1.0 card. thanks Janne _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
