Hi, Dietmar Dietmar Herrendörfer schrieb: > Me again, > > in order to clear up a bit, I gone through the installation steps for my > MSI card again - as I've already mentioned in my first post, I couldn't > clearly remember what had fixed the situation for me in the end (I do > not have the problem myself anymore, but thought to through in some > hints for others). >> This has nothing to do with the firmware. >> > I now agree with this, at least I can't reproduce any problems any more. > But also that I don't manage to reproduce the errors ... >> I then do a modprobe saa7134_dvb and it says: >> >> DVB: registering frontend 1 (Philips TDA10046H DVB-T)... >> >> >> >> and then later: >> >> tda1004x: found firmware revision 29 -- ok >> >> >> >> But then when I try to tune to a channel in mythtv, I see this in the >> >> syslog: >> >> tda1004x: pll set failed >> >> > ... which I found in a January post to this mailing list and which I was > experiencing myself initially. > >> idea. Maybe they learned and changed this during production and cut the >> connection between the tda8275a and tda10046. This would explain what you >> observed. >> > Well my card is still the same, so I guess a newer kernel (with some > bugs fixed) or different i2c setup might have resolved the issue for me. > The latter isn't completely unlikely as I started up some > hardware-monitoring at the same time. I guess, it just appeared to me > as if the firmware change did the job. > > Dietmar > Ok. So you say the card is working for you now? I will upload some changes to my personal repository the next days. May i ask you to test these and report? I will leave you a note when i am ready. Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb