dont forget having to recompile your kernel to actually support the cardand recompiling mplayer to support dvb:/ and trying to find some obscure app to make channel map... or you could just use windows... On 3/7/07, CIJOML <cijoml@xxxxxxxx> wrote:
Hi, you should try option card=XX where XX are numbers taken from linux/Documentation to manually set card/tuner type. If it is DVB-T card with mplayer you play mplayer dvb://"name of channel" Best regards Michal Dne úterý 06 březen 2007 18:16 Florian Zwicke napsal(a): > Hi, > > my new notebook is equipped with a DVB-T card, and I fear there may be > no support for it on Linux, yet. > The notebook (ASUS A7CC-7S018C) was released about a month ago, and I > guess the hardware is about the same age. Therefore, I'm not really that > surprised at not finding any information about the card on the Internet > (well, it would be kinda nice if AverMedia mentioned it on one of its > websites, but they don't seem to consider that necessary). > Windows Vista calls the card "AVerMedia M10D MiniPCI Hybrid DVBT". > > lspci says this: > > 01:02.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 > Video Broadcast Decoder (rev d1) > Subsystem: Avermedia Technologies Inc Unknown device 4836 > > 01:02.0 0480: 1131:7133 (rev d1) > Subsystem: 1461:4836 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Interrupt: pin A routed to IRQ 7 > Region 0: Memory at f9dff800 (32-bit, non-prefetchable) [size=2K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > And that's about all the information I got. I don't want to open the > laptop unless it's really necessary, so I've never actually seen the card. > I read that SAA7133 was supported quite well, so I tried to load the > right modules, but I *think* it didn't work (actually I have no idea). > People said I could use tvtime to check, but that doesn't work with my > video card. Anyway, I wanna use mplayer. But I don't know exactly how to > play TV with mplayer, so the reason I saw nothing but a black screen may > alsa have been me making a mistake when invoking mplayer. > > Here's what I tried: > mplayer tv:// -tv > driver=v4l2:norm=PAL:input=0:amode=1:width=384:height=288:outfmt=yuy2:devic >e=/dev/video0:chanlist=europe-west:channel=E2 (got it from Gentoo Wiki, > didn't have time to read the mplayer manual, yet) > > So, if anyone could tell me how best to find out whether card and tuner > are working (so I can try out all AverMedia cards or so), that would be > nice. > > Here's what dmesg had to say: > > saa7130/34: v4l2 driver version 0.2.14 loaded > ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 19 (level, low) -> IRQ 19 > saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 19, latency: 64, mmio: > 0xf9dff800 > saa7133[0]: subsystem: 1461:4836, board: UNKNOWN/GENERIC > [card=0,autodetected] > saa7133[0]: board init: gpio is 0 > saa7133[0]: i2c eeprom 00: 61 14 36 48 00 00 00 00 00 00 00 00 00 00 00 00 > saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 80 ff ff ff ff > saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 40: ff 6b 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] > saa7133[0]: registered device video0 [v4l2] > saa7133[0]: registered device vbi0 > > So, my questions now are: Is the card known in any way? If not, how can > I best test the different existing drivers? If I don't find anything > there, are there some simple things I could change in the kernel > sources, or will I have to build a completely new driver? (as you might > notice, I'm not prepared to give up, no matter what it takes) > > Ah, also: will it be _really_ useful to open the laptop and take a look > at the card? > > TIA, > Florian Zwicke > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
